Version 1.3.13

The latest news about Gargoyle

Moderator: Moderators

Eric
Site Admin
Posts: 1441
Joined: Sat Jun 14, 2008 1:14 pm

Version 1.3.13

Post by Eric »

New in 1.3.13:

  • More bandwidth module fixes, should further increase stability
  • On dual band routers, wireless hosts connected to 5GHz SSID now show up in the wireless section of Connected Hosts
  • Bumps underlying OpenWrt Backfire version, allowing WNDR3700v2 support
  • Fixes support for TP-Link WR-941NDv3 and other routers that use the same switch configuration
  • Fixes bug causing incorrect display of DHCP Lease Expiration times in Connection/Basic section

sco77
Posts: 43
Joined: Tue Nov 09, 2010 7:28 pm

Re: Version 1.3.13

Post by sco77 »

So far so good, best build yet.

MathGuy42
Posts: 12
Joined: Wed Feb 09, 2011 8:37 am

Re: Version 1.3.13

Post by MathGuy42 »

I successfully upgrade 1.3.12->1.3.13, but had to use the mtd write method again. The GUI and sysupgrade didn't work. Do you think I'll have to go this route from now on?

I have a WRT54GL, v 1.1. Thanks.

Cezary
Posts: 133
Joined: Thu Sep 11, 2008 12:57 pm
Location: Poland
Contact:

Re: Version 1.3.13

Post by Cezary »

Eric, git not works...

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.3.13

Post by DoesItMatter »

keelerds wrote:I successfully upgrade 1.3.12->1.3.13, but had to use the mtd write method again. The GUI and sysupgrade didn't work. Do you think I'll have to go this route from now on?

I have a WRT54GL, v 1.1. Thanks.


How is the RAM usage on the WRT54GL?

WZR-HP-G300NH - upgraded from 1.3.12 -> 1.3.13 via GUI

No issues on upgrading, seems stable and fast for me.

Will do some wireless tests this weekend.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

MathGuy42
Posts: 12
Joined: Wed Feb 09, 2011 8:37 am

Re: Version 1.3.13

Post by MathGuy42 »

DoesItMatter wrote:
keelerds wrote:I successfully upgrade 1.3.12->1.3.13, but had to use the mtd write method again. The GUI and sysupgrade didn't work. Do you think I'll have to go this route from now on?

I have a WRT54GL, v 1.1. Thanks.


How is the RAM usage on the WRT54GL?

Currently 12.1MB / 13.1MB (92.1%). That is pretty typical. I see 96% sometimes. I don't think I've seen higher.

I bought the WRT54GL because I thought it would be the most reliable and stable. I sometimes wish I had a router with more memory though. Always being above 90% memory usage makes me nervous.

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Version 1.3.13

Post by DoesItMatter »

keelerds wrote:Currently 12.1MB / 13.1MB (92.1%). That is pretty typical. I see 96% sometimes. I don't think I've seen higher.

I bought the WRT54GL because I thought it would be the most reliable and stable. I sometimes wish I had a router with more memory though. Always being above 90% memory usage makes me nervous.


I think that is your issue right there.

When you update via the GUI, it loads it into memory

Since you only have 1MB left, it can't load the image into memory.

Safest way to upgrade is via TFTP.

You might want to consider sticking with 1.2.5 for the WRT54GL
Should be a bit better for memory management.

If you really want to stick with the WRT54G series, you may want
to consider modding it to add more flash/ram and/or look into
getting a WRT54G-TM - if they are still available somewhere.

4MB Flash / 16MB Ram is just not enough anymore sadly.
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

k1nd
Posts: 3
Joined: Fri Apr 01, 2011 1:13 pm

Re: Version 1.3.13

Post by k1nd »

Using TP-Link 1043NDv1.7, migrated from dd-wrt to Gargoyle 1.3.13. Unfortunately I cannot get UPnP to work ("UPnP Enabled" is checked). Individual Port Forwarding works as expected.

Any ideas how to fix UPnP?

Other than that, this firmware works mighty fine for me!

User avatar
olo
Posts: 31
Joined: Mon Mar 14, 2011 7:51 am

Re: Version 1.3.13

Post by olo »

From 1.3.12 including 1.3.13 Gargoyle can't resolve name using OpenDNS servers. I also experience issues with Asus WL-500-gP V2 described in 1.3.12 thread. Did anyone experience any issues on Asus WL-500-gP V2 with latest versions of Gargoyle?
Best regards,
Olo
---
Asus WL-500-gP V2 @ v1.7.0 - WiFi - unable to enable.
TP-Link TL-WR1043ND - so far so good :)

behappy
Posts: 83
Joined: Thu Mar 31, 2011 5:06 pm

Re: Version 1.3.13

Post by behappy »

@k1nd,
Don't know why it shouldn't work for you. just test w. torrent on my wndr3700 w. this fw build. Works great, so the question is how your firewall is set up! bwt. you can see the udp connections from window - Connected Hosts -

Post Reply