Version 1.11.0 : Based on OpenWrt 18.06

The latest news about Gargoyle

Moderator: Moderators

Lantis
Moderator
Posts: 5824
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by Lantis »

Client ports don’t matter, only the server.
If your server has settings to limit the server ports, this should be enabled.

Forwarding those will then be fine.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

RomanHK
Posts: 721
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by RomanHK »

I have solved this problem for a long time and yes, it's nathelper OpenWrt 15.05 (Chaos Calmer) - here it went fully automatic, but from the LEDE vision, the range of passive ports must be enabled.

Code: Select all

[  391.776779] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.

@jackspm
Yes, on the router do the port forwarding range from 55536 to 55663 and it should work.
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

encro
Posts: 73
Joined: Fri Mar 13, 2015 10:52 am
Location: au.victoria

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by encro »

Thanks Gargoyle Team

I upgraded with No Preserve.
UI wouldn't allow DHCP Assignments to be Saved.
Reset, Reconfigured.
All OK after Reset.
QoS Rules are different from the Ruleset Update Thread.
Netgear WNDR3700v4 - Gargoyle 1.12.x
D-Link DIR-835 - Gargoyle 1.7.1 (Deceased)
How to manually set up PIA's OpenVPN in Gargoyle (Private Internet Access): https://www.gargoyle-router.com/phpbb/viewtopic.php?f=11&t=9129&p=45410#p45410

snake218
Posts: 20
Joined: Wed Jan 28, 2015 6:59 pm

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by snake218 »

Installed on a c7 v2 router, coming from RC5 with preserving settings. Getting slow/none intermittent internet connection after a couple of hours (random), suspect is a router problem cause seems to fix when rebooting router.

RomanHK
Posts: 721
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by RomanHK »

snake218 wrote:Installed on a c7 v2 router, coming from RC5 with preserving settings. Getting slow/none intermittent internet connection after a couple of hours (random), suspect is a router problem cause seems to fix when rebooting router.

Here you wrote that it is going to be without errors:
viewtopic.php?f=3&t=11898&p=52277#p52277

In this case, I recommend resetting to defaults without preserving the settings and setting it up again.

EDIT: I was wondering if you use the adblock plugin, turn it off and try stability.
Turris Omnia with Gargoyle 1.12.0
Linksys WRT3200ACM with Gargoyle 1.12.0
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

ispyisail
Moderator
Posts: 4896
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by ispyisail »

In this case, I recommend resetting to defaults without preserving the settings and setting it up again.


+1

snake218
Posts: 20
Joined: Wed Jan 28, 2015 6:59 pm

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by snake218 »

RomanHK wrote:
snake218 wrote:Installed on a c7 v2 router, coming from RC5 with preserving settings. Getting slow/none intermittent internet connection after a couple of hours (random), suspect is a router problem cause seems to fix when rebooting router.

Here you wrote that it is going to be without errors:
viewtopic.php?f=3&t=11898&p=52277#p52277

In this case, I recommend resetting to defaults without preserving the settings and setting it up again.

EDIT: I was wondering if you use the adblock plugin, turn it off and try stability.

I was using adblock plugin and definitely the problem was worse with it, unistalled but problem persist. I will try a new install

jackspm
Posts: 9
Joined: Sat Jul 05, 2014 12:08 pm

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by jackspm »

RomanHK wrote:@jackspm
Yes, on the router do the port forwarding range from 55536 to 55663 and it should work.

Adding the port forwarding range works.

Since the previous build doesn't require the port forwarding range setting, does this mean we need to do this moving forward?

Thanks.

Lantis
Moderator
Posts: 5824
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by Lantis »

Yes, until I do some reading about reinstating the FTP (and other) NAT helpers correctly.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

jackspm
Posts: 9
Joined: Sat Jul 05, 2014 12:08 pm

Re: Version 1.11.0 : Based on OpenWrt 18.06

Post by jackspm »

Just want to point out something cosmetic. The bandwidth usage table and display months interval. The displayed months are shifted...like Jan 2019 is actually Feb 2019 and Feb 2019 is actually Mar 2019.

Post Reply