gargoyle-ispy 2015-November-13 18:33.torrent

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

ispyisail
Moderator
Posts: 4928
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

gargoyle-ispy 2015-November-13 18:33.torrent

Post by ispyisail »

USE AT YOUR OWN RISK

gargoyle-ispy 2015-November-13 18:33.torrent
https://goo.gl/MgrgLL

Routers
https://goo.gl/UQXfw1

Code: Select all

0b71c00c			11/11/2015 04:03 am	nworbnhoj	
i18n Please check your Internet connection
43db7d92			11/11/2015 04:03 am	nworbnhoj	
Please check your Internet connection.
86325527			11/11/2015 12:15 am	nworbnhoj	
separate WAN IP check from opkg update
57e94551			11/10/2015 11:15 pm	nworbnhoj	
Correct test for Internet connectivity
d6c343a9			11/10/2015 12:50 pm	nworbnhoj	
correct typo
c9a231ad			11/10/2015 12:43 pm	nworbnhoj	
Prompt check Internet connection to Refresh Plugins
e34acf86			11/10/2015 12:41 pm	nworbnhoj	
Prompt check WAN connection to Refresh Plugins
b08a6c19			11/10/2015 11:15 am	nworbnhoj	
Move Refresh Plugins Button up to top of section

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by nworbnhoj »

This is a minor update: the "Refresh Plugins" button is moved up to the top of the section and if it is clicked in the absence of a WAN connection, then the user is prompted to Check their Internet connection.
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

uiotewre
Posts: 24
Joined: Tue Jan 20, 2015 2:03 am

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by uiotewre »

Flashed the spare DIR-615 C1 and swapped it with the 1.6.2 that was being used for the past year or so.

Glad to see the LED fixes have been incorporated :)

Only difference so far is that it will not allow me to set a custom transmit of 21 like before. I tried to apply the reghack.mips.elf like with 1.6.2, but like before, it applied successfully to cfg80211.ko but then said no space left on device when I tried to patch cfg80211.ko.

Would it be please be possible to add it to the next test release?

Thanks :D

edit: I just had to add that web browsing is so much more noticeably snappier compared to 1.6.2. This is fantastic!

Lantis
Moderator
Posts: 5978
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by Lantis »

You shouldn't need to use that hack anymore.
Just set your country code on each wifi interface from the command line.

See this wiki https://wiki.openwrt.org/doc/uci/wireless.
The option is "country" with a 2 letter code. E.g. Australia is AU.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

uiotewre
Posts: 24
Joined: Tue Jan 20, 2015 2:03 am

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by uiotewre »

Thanks.

I added txpower '21' and country 'jp', and iw phy0 info now gives me this:

Code: Select all

root@Gargoyle:~# iw phy0 info
Wiphy phy0
        max # scan SSIDs: 4
        max scan IEs length: 2257 bytes
        Retry short limit: 7
        Retry long limit: 4
        Coverage class: 0 (up to 0m)
        Device supports AP-side u-APSD.
        Device supports T-DLS.
        Available Antennas: TX 0x3 RX 0x7
        Configured Antennas: TX 0x3 RX 0x7
        Supported interface modes:
                 * IBSS
                 * managed
                 * AP
                 * AP/VLAN
                 * WDS
                 * monitor
                 * mesh point
                 * P2P-client
                 * P2P-GO
        Band 1:
                Capabilities: 0x104e
                        HT20/HT40
                        SM Power Save disabled
                        RX HT40 SGI
                        No RX STBC
                        Max AMSDU length: 3839 bytes
                        DSSS/CCK HT40
                Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
                Minimum RX AMPDU time spacing: 8 usec (0x06)
                HT TX/RX MCS rate indexes supported: 0-15
                Frequencies:
                        * 2412 MHz [1] (20.0 dBm)
                        * 2417 MHz [2] (20.0 dBm)
                        * 2422 MHz [3] (20.0 dBm)
                        * 2427 MHz [4] (20.0 dBm)
                        * 2432 MHz [5] (20.0 dBm)
                        * 2437 MHz [6] (19.0 dBm)
                        * 2442 MHz [7] (19.0 dBm)
                        * 2447 MHz [8] (19.0 dBm)
                        * 2452 MHz [9] (19.0 dBm)
                        * 2457 MHz [10] (19.0 dBm)
                        * 2462 MHz [11] (19.0 dBm)
                        * 2467 MHz [12] (20.0 dBm)
                        * 2472 MHz [13] (20.0 dBm)
                        * 2484 MHz [14] (20.0 dBm)
        valid interface combinations:
                 * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1,
                   total <= 2048, #channels <= 1, STA/AP BI must match
                 * #{ WDS } <= 2048,
                   total <= 2048, #channels <= 1, STA/AP BI must match
        HT Capability overrides:
                 * MCS: ff ff ff ff ff ff ff ff ff ff
                 * maximum A-MSDU length
                 * supported channel width
                 * short GI for 40 MHz
                 * max A-MPDU length exponent
                 * min MPDU start spacing
And the change is indeed reflected in the Gargoyle GUI (Now shows 0-20dBm)

I believe that the reghack.mips.elf also bypassed the artificial dBm limit. Shouldn't it be able to theoretically go higher (DD-WRT allowed it - not that I'm complaining :) )

Lantis
Moderator
Posts: 5978
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by Lantis »

Those are indeed the correct outputs for Japan.

In theory yes it could go higher if your hardware is capable of doing so. But that would be against the local regulations.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

User avatar
Doky
Posts: 20
Joined: Thu Sep 04, 2014 11:36 am
Location: Hungary
Contact:

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by Doky »

Refresh Plugins button not work :)
>>>>> Doky <<<<<
Router: TP-Link TL-WR1043ND v2.1 (Gargoyle 1.9)
NAS server: Zyxel NSA-310 (Western Digital Red 1TB)

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by nworbnhoj »

Doky wrote:Refresh Plugins button not work :)
Really! :-(
Need a little more info to investigate. When you click "Refresh Plugins" does exactly nothing happen? Did you have a WAN IP address (ie Internet connection) to the router?
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

francisuk1989
Posts: 30
Joined: Thu Sep 24, 2015 4:46 am
Location: United Kingdom
Contact:

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by francisuk1989 »

if is the case of refreshing the plugins, cant it be refreshed over SSH?
TP-Link TL-WDR3600 v1.5 (ar71xx)
EE Brightbox 1/Arcadyan AR7516 (BCM63xx)
MK RB750r2 - OpenWrt Snapshot ar71xx
D-Link DIR-615 D2 - OpenWrt (ramips/rt305x)
AWS Region Latency Checker # http://awsspeedtest.xvf.dk

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by nworbnhoj »

Doky wrote:Refresh Plugins button not work :)
:oops: err yes, whoops. my bad.
Stay tuned for the next beta release...
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

Post Reply