gargoyle-ispy 2015-November-13 18:33.torrent

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

Lantis
Moderator
Posts: 5978
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by Lantis »

That commit made me laugh.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

uiotewre
Posts: 24
Joined: Tue Jan 20, 2015 2:03 am

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by uiotewre »

Wireless client with Intel 6100 has slown to a crawl. Communication with the internet as well as with the router is extremely slow.

Is there any log I can post?

Thanks

edit:

Here is a dmesg:

Code: Select all

[    0.000000] Linux version 3.18.23 (user@Linux) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 unknown) ) #1 Fri Nov 13 11:22:57 NZDT 2015
[    0.000000] MyLoader: sysp=48812010, boardp=62380220, parts=02928002
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9130 rev 2
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x01ffffff]
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 8035ddf0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8192 pages, LIFO batch:0
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=DIR-615-C1 console=ttyS0,115200 mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 28456K/32768K available (2500K kernel code, 122K rwdata, 532K rodata, 228K init, 188K bss, 4312K reserved)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:100.000MHz, Ref:5.000MHz
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.100000] NET: Registered protocol family 16
[    0.100000] MIPS: machine is D-Link DIR-615 rev. C1
[    0.620000] Switched to clocksource MIPS
[    0.630000] NET: Registered protocol family 2
[    0.630000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[    0.630000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.640000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.650000] TCP: reno registered
[    0.650000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.650000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.660000] NET: Registered protocol family 1
[    0.670000] PCI: CLS 0 bytes, default 32
[    0.670000] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.680000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.690000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.700000] msgmni has been set to 55
[    0.700000] io scheduler noop registered
[    0.710000] io scheduler deadline registered (default)
[    0.710000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.720000] console [ttyS0] disabled
[    0.740000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 6250000) is a 16550A
[    0.750000] console [ttyS0] enabled
[    0.760000] bootconsole [early0] disabled
[    0.780000] m25p80 spi0.0: found w25x32, expected m25p80
[    0.790000] m25p80 spi0.0: w25x32 (4096 Kbytes)
[    0.790000] 4 cmdlinepart partitions found on MTD device spi0.0
[    0.800000] Creating 4 MTD partitions on "spi0.0":
[    0.810000] 0x000000000000-0x000000020000 : "u-boot"
[    0.810000] 0x000000020000-0x000000030000 : "config"
[    0.820000] 0x000000030000-0x0000003f0000 : "firmware"
[    0.840000] 2 uimage-fw partitions found on MTD device firmware
[    0.840000] 0x000000030000-0x0000001476a7 : "kernel"
[    0.850000] 0x0000001476a7-0x0000003f0000 : "rootfs"
[    0.850000] mtd: device 4 (rootfs) set to be root filesystem
[    0.860000] 1 squashfs-split partitions found on MTD device rootfs
[    0.870000] 0x0000003a0000-0x0000003f0000 : "rootfs_data"
[    0.870000] 0x0000003f0000-0x000000400000 : "art"
[    0.890000] switch0: Atheros AR8216 rev. 1 switch registered on ag71xx-mdio.0
[    0.900000] libphy: ag71xx_mdio: probed
[    1.250000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd042, driver=Atheros AR8216/AR8236/AR8316]
[    1.260000] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RMII
[    1.590000] ag71xx ag71xx.1: connected to PHY at ag71xx-mdio.0:04 [uid=004dd042, driver=Atheros AR8216/AR8236/AR8316]
[    1.600000] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:RMII
[    1.610000] TCP: cubic registered
[    1.610000] NET: Registered protocol family 17
[    1.610000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.630000] Bridge firewalling registered
[    1.630000] 8021q: 802.1Q VLAN Support v1.8
[    1.650000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    1.660000] Freeing unused kernel memory: 228K (80377000 - 803b0000)
[    3.220000] init: Console is alive
[    3.230000] init: - watchdog -
[    5.250000] init: - preinit -
[    6.200000] random: procd urandom read with 9 bits of entropy available
[    7.550000] ar71xx: pll_reg 0xb8050014: 0x13000a44
[    7.550000] eth0: link up (100Mbps/Full duplex)
[    9.420000] jffs2: notice: (316) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    9.440000] mount_root: switching to jffs2 overlay
[    9.490000] eth0: link down
[    9.500000] procd: - early -
[    9.510000] procd: - watchdog -
[   10.190000] procd: - ubus -
[   11.210000] procd: - init -
[   12.420000] tun: Universal TUN/TAP device driver, 1.6
[   12.420000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   12.430000] gre: GRE over IPv4 demultiplexor driver
[   12.440000] ip_gre: GRE over IPv4 tunneling driver
[   12.480000]  Hooked IMQ after mangle on PREROUTING
[   12.480000]  Hooked IMQ after nat on POSTROUTING
[   12.490000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1, imq_dev_accurate_stats = 1)
[   12.500000]  Hooking IMQ before NAT on PREROUTING.
[   12.500000]  Hooking IMQ after NAT on POSTROUTING.
[   12.550000] u32 classifier
[   12.550000]     input device check on
[   12.550000]     Actions configured
[   12.560000] Mirror/redirect action on
[   12.640000] Loading modules backported from Linux version master-2015-03-09-0-g141f155
[   12.650000] Backport generated by backports.git backports-20150129-0-gdd4a670
[   12.670000] Ebtables v2.0 registered
[   12.690000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.720000] nf_conntrack version 0.5.0 (448 buckets, 1792 max)
[   12.770000] Netfilter messages via NETLINK v0.30.
[   12.880000] xt_time: kernel timezone is -0000
[   12.930000] cfg80211: Calling CRDA to update world regulatory domain
[   12.950000] cfg80211: World regulatory domain updated:
[   12.950000] cfg80211:  DFS Master region: unset
[   12.960000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   12.960000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.970000] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   12.980000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   12.990000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.000000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   13.010000] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   13.010000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   13.020000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   13.130000] PPP generic driver version 2.4.2
[   13.140000] PPP MPPE Compression module registered
[   13.140000] NET: Registered protocol family 24
[   13.170000] PPTP driver version 0.8.5
[   13.280000] ath: phy0: eeprom contains invalid mac address: 09:20:75:b0:59:54
[   13.280000] ath: phy0: random mac address will be used: 6e:84:bf:62:97:d6
[   13.290000] ath: EEPROM regdomain: 0x0
[   13.290000] ath: EEPROM indicates default country code should be used
[   13.290000] ath: doing EEPROM country->regdmn map search
[   13.290000] ath: country maps to regdmn code: 0x3a
[   13.290000] ath: Country alpha2 being used: US
[   13.290000] ath: Regpair used: 0x3a
[   13.310000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   13.320000] ieee80211 phy0: Atheros AR9100 MAC/BB Rev:7 AR2122 RF Rev:a2 mem=0xb80c0000, irq=2
[   13.330000] cfg80211: Calling CRDA for country: US
[   13.330000] cfg80211: Regulatory domain changed to country: US
[   13.340000] cfg80211:  DFS Master region: FCC
[   13.340000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   13.350000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[   13.360000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[   13.370000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   13.380000] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   13.390000] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[   23.760000] device eth0 entered promiscuous mode
[   24.010000] ar71xx: pll_reg 0xb8050014: 0x13000a44
[   24.010000] eth0: link up (100Mbps/Full duplex)
[   24.010000] br-lan: port 1(eth0) entered forwarding state
[   24.020000] br-lan: port 1(eth0) entered forwarding state
[   26.020000] br-lan: port 1(eth0) entered forwarding state
[   26.050000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 1 is up
[   26.050000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 2 is up
[   27.220000] device wlan0 entered promiscuous mode
[   27.240000] cfg80211: Calling CRDA for country: JP
[   27.240000] cfg80211: Regulatory domain changed to country: JP
[   27.250000] cfg80211:  DFS Master region: JP
[   27.250000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   27.260000] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   27.270000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   27.280000] cfg80211:   (4910000 KHz - 4990000 KHz @ 40000 KHz), (N/A, 2300 mBm), (N/A)
[   27.290000] cfg80211:   (5030000 KHz - 5090000 KHz @ 40000 KHz), (N/A, 2300 mBm), (N/A)
[   27.290000] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   27.300000] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   27.310000] cfg80211:   (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s)
[   27.360000] br-lan: port 2(wlan0) entered forwarding state
[   27.370000] br-lan: port 2(wlan0) entered forwarding state
[   29.370000] br-lan: port 2(wlan0) entered forwarding state
[   44.880000] ar71xx: pll_reg 0xb8050018: 0x13000a44
[   44.880000] eth1: link up (100Mbps/Full duplex)
[   46.170000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 5 is up
[   54.900000] random: nonblocking pool is initialized
[   73.200000] ipt_bandwidth: timezone shift of 300 minutes detected, adjusting
[   73.210000]                old minutes west=0, new minutes west=300
[  101.120000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 2 is down
[  103.120000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 2 is up
[33118.750000] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[34292.410000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 3 is up
[34293.220000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 3 is down
[34323.220000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 3 is up
[34325.220000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 3 is down
[34333.220000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 2 is down
[34336.410000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 4 is up
[34352.410000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 1 is down
[34356.410000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 3 is up
[34837.220000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 2 is up
[34838.410000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 2 is down
[34840.410000] Atheros AR8216/AR8236/AR8316 ag71xx-mdio.0:04: Port 2 is up
I didn't see anything out of the ordinary with logread.

nworbnhoj
Posts: 914
Joined: Mon Jul 21, 2014 10:08 am
Location: Australia
Contact:

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by nworbnhoj »

Lantis wrote:That commit made me laugh.
:-P
Can you help someone else get Gargoyle up and running?
TL-WDR3600 : Gargoyle 1.9.0 : NBN FixedWireless
TL-WR1043ND-V2 : Gargoyle 1.8.0 : 3G Huawei E160E

chojny65
Posts: 12
Joined: Thu Oct 29, 2015 4:03 pm

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by chojny65 »

.... unfortunately my Archer C7 v2 firmware 1.9 is unstable, two days is OK and loses settings after wifi ...

vivekt
Posts: 7
Joined: Fri May 13, 2016 6:24 am

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by vivekt »

Hi someone give me a link to the latest version of firmware gargoyle_1.9.x factory and system update for DIR615.

Thanks in advance

vivekt
Posts: 7
Joined: Fri May 13, 2016 6:24 am

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by vivekt »

Add- I got to the link and updated the firmware. Thanks a ton, it works like breeze. But, I did figure out that the connected wireless hosts does not get populated. May be some error from my end.

Any help here??

Lantis
Moderator
Posts: 5978
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by Lantis »

Which version are you running now? That issue was fixed a long time ago.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

vivekt
Posts: 7
Joined: Fri May 13, 2016 6:24 am

Re: gargoyle-ispy 2015-November-13 18:33.torrent

Post by vivekt »

I am on 1.9.x for Dir 615

Thanks..

Post Reply