Gargoyle-ispy 2014-April-28.7z

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

n0pin
Posts: 129
Joined: Thu Jan 09, 2014 6:39 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by n0pin »

If you are running 1.6.1 without any issues and you don't use OpenVPN, I see no point in upgrading to this version.

I also never heard of problem about login not working with Safari. Where is the issue?

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by scrmtrey »

Image

After Safari Reset,it is working for like a minute or so , and then its not working again. Dunno where is the problem.

ddwrt is working in safari well. (But i switch to gargoyle cause i have an issue with wifi driver freeze, with the latest version).


Similar problem : http://www.gargoyle-router.com/phpbb/vi ... f=8&t=3046


Also i was wondering if u can set the operation mode to : NG only (N+G) without B ??
wdr3600 v1.5 @ Latest ispyisail build

kuklux1921
Posts: 12
Joined: Tue May 13, 2014 11:28 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by kuklux1921 »

DIR 825 c1 all are working except led. all led indicator are not working

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by scrmtrey »

WIFI drop rate to 5 mbit or less and stays there. Solution is to reset wifi or reboot router. I am using gargoyle 1.6.1 on wr1043nd v1.10.

How can i fix this ? i read about disable_ani, but don't know how to do this.
wdr3600 v1.5 @ Latest ispyisail build

dieselz
Posts: 41
Joined: Fri Jun 07, 2013 3:39 am
Location: Dubai, UAE
Contact:

Re: Gargoyle-ispy 2014-April-28.7z

Post by dieselz »

isn't there any hope for another release soon because i been checking three times a day that wireless drop is awful, and i cannot figure out how to disable that ANI, if anyone got pointers please direct me..
thank you ispy, please keep up the good work <3
Linksys WRT1900ACS V2 1.12.x gargoyle-iSpy

n0pin
Posts: 129
Joined: Thu Jan 09, 2014 6:39 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by n0pin »

EDIT: Look in the post below.
Last edited by n0pin on Fri Aug 01, 2014 8:11 am, edited 1 time in total.

nieroster
Posts: 27
Joined: Sun Apr 14, 2013 10:56 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by nieroster »

Hello n0pin,

thanks for the hint on how to disable ANI!

I assume the line "echo 1 >/sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani" needs to be added before the "exit 0" line, right?

just to confirm: the copmplete /etc/rc.local looks like this now:

Code: Select all

# Put your custom commands here that should be executed once
# the system init finished. By default this file does nothing.

echo 1 >/sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani
exit 0
and to take effect a reboot is needed.

EDIT: the only thing is, that it does not seem to work for me, from what I can see in the syslogs:

Code: Select all

/etc/rc.local: line 4: can't create /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani: Permission denied
regards,
nieroster

dieselz
Posts: 41
Joined: Fri Jun 07, 2013 3:39 am
Location: Dubai, UAE
Contact:

Re: Gargoyle-ispy 2014-April-28.7z

Post by dieselz »

same here, i cannot cd and always permission denied, i was about to PM you about that maybe you could help out.
but i remember reading that i need to make changes to the kernel using menuconfig or something, but i am new the whole Linux scene and i am eager to learn.
Linksys WRT1900ACS V2 1.12.x gargoyle-iSpy

scrmtrey
Posts: 102
Joined: Wed May 14, 2014 2:25 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by scrmtrey »

Use winscp to get access to router file system. Then edit the rc.local file and you are done. Reboot router after file edited.
wdr3600 v1.5 @ Latest ispyisail build

nieroster
Posts: 27
Joined: Sun Apr 14, 2013 10:56 am

Re: Gargoyle-ispy 2014-April-28.7z

Post by nieroster »

scrmtrey,

I used WinSCP to edit rc.local, this is not the problem.

The problem is that the line

Code: Select all

 echo 1 >/sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani
results in an error because there are no permissions to create a file there.

Code: Select all

sysinit: /etc/rc.local: line 4: can't create /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani: Permission denied
Even if I try to create the file manually in WinSCP, logged in as root it won't let me do that.

By the way: shouldn't the existing file ani just be renamed to disable_ani once we know how to gain permission? i.e. change the line in rc.local to:

Code: Select all

mv /sys/kernel/debug/ieee80211/phy0/ath9k/ani /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani
This command leads to the following syslog entry:

Code: Select all

mv: can't rename '/sys/kernel/debug/ieee80211/phy0/ath9k/ani': Operation not permitted
Maybe the file is locked after boot sequence is completed. Any hints?

Regards,
nieroster

Post Reply