USE AT YOUR OWN RISK
Gargoyle-ispy 2014-January-03.7z
http://goo.gl/tUujV7
Update Norwegian Language + some fixes.
Gargoyle-ispy 2014-January-03.7z
Moderator: Moderators
Re: Gargoyle-ispy 2014-January-03.7z
your build contains some plguins that cant be used by gargoyle gui if iam right ?
Re: Gargoyle-ispy 2014-January-03.7z
what ???
This build is from the gargoyle repo, I make no custom changes
This build is from the gargoyle repo, I make no custom changes
Re: Gargoyle-ispy 2014-January-03.7z
Harpy,
You need to logout and login again before installed plugins can be found in the gui.
You need to logout and login again before installed plugins can be found in the gui.
Re: Gargoyle-ispy 2014-January-03.7z
After successfully using D-Link Firmware Upgrade System (firmware recovery mode) with Gargoyle~factory.bin to flash from stock.
I have been unable use Gargoyle > System > Update Firmware to flash Gargoyle~FAT~sysupgrade.bin. The web interface hangs forever and does not flash. System > Plugins, displays Root Drive 2.563 MBytes Total.
Any help appreciated, thanks.
I made a new topic...
http://www.gargoyle-router.com/phpbb/vi ... f=8&t=5232
I have been unable use Gargoyle > System > Update Firmware to flash Gargoyle~FAT~sysupgrade.bin. The web interface hangs forever and does not flash. System > Plugins, displays Root Drive 2.563 MBytes Total.
Any help appreciated, thanks.
I made a new topic...
http://www.gargoyle-router.com/phpbb/vi ... f=8&t=5232
Last edited by WoodyUK on Tue Jan 14, 2014 3:24 pm, edited 2 times in total.
Dlink dir825 revB1 stock FW 2.09EU b09 jan2013 -> Gargoyle-ispy 1.5.X (Built 20140102-1815 git@3afc491)
Re: Gargoyle-ispy 2014-January-03.7z
Tested this roll on 2 different units (buffalo wzr-hp-ag300h and wzr-hp-g300nh v1) and its doing great so far on the ag300h (main gateway/ap) but on the g300nh (client+ap) is giving errors as the last few rolls have given, just a little different error now.
Instead of just:
[29402.410000] br-wan: received packet on wlan0-1 with own address as source address
Is now including this with the log as well:
[29398.480000] br-wan: received packet on wlan0-1 with own address as source address
[29402.410000] br-wan: received packet on wlan0-1 with own address as source address
[35476.520000] ------------[ cut here ]------------
[35476.520000] WARNING: at /home/user/gargoyle/ar71xx-src/build_dir/linux-ar71xx_generic/compat-wireless-2013-06-27/net/mac80211/rx.c:3318 0x8319ca4c()
[35476.540000] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 78 (0x4e)
[35476.550000] Modules linked in: uvcvideo fuse gspca_zc3xx gspca_ov534 gspca_main videobuf2_vmalloc videobuf2_memops videobuf2_core qcserial option usb_wwan v4l2_common videodev ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda sierra_net(O) sierra(O) usbserial usblp usbnet cdc_acm i2c_dev ath79_wdt ledtrig_usbdev ledtrig_netdev xt_set(O) ip_set_list_set(O) ip_set_hash_netport(O) ip_set_hash_netiface(O) ip_set_hash_net(O) ip_set_hash_ipportnet(O) ip_set_hash_ipportip(O) ip_set_hash_ipport(O) ip_set_hash_ip(O) ip_set_bitmap_port(O) ip_set_bitmap_ipmac(O) ip_set_bitmap_ip(O) ip_set(O) ebt_among ebt_802_3 nfnetlink xt_IMQ imq ipt_weburl ipt_webmon ipt_timerange nf_nat_tftp nf_conntrack_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_conntrack_sip nf_nat_pptp nf_conntrack_pptp nf_nat_h323 nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_amanda nf_conntrack_amanda nf_conntrack_broadcast nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_iprange xt_HL xt_hl xt_ecn ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length xt_DSCP xt_dscp xt_string xt_layer7 xt_quota xt_pkttype xt_physdev xt_owner ipt_bandwidth ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_recent xt_helper xt_connmark xt_connbytes pptp pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables nfsd nfs msdos ip_gre gre tun ppp_async ppp_generic slhc vfat fat lockd sunrpc hfsplus ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_13 nls_iso8859_1 nls_cp866 nls_cp852 nls_cp850 nls_cp775 nls_cp437 nls_cp1251 nls_cp1250 mac80211(O) ts_fsm ts_bm ts_kmp crc_ccitt exportfs cfg80211(O) compat(O) input_core arc4 aes_generic usb_storage ohci_hcd ehci_hcd sd_mod ext4 jbd2 mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[35476.730000] Call Trace:[<80279840>] 0x80279840
[35476.740000] [<80279840>] 0x80279840
[35476.740000] [<80071a8c>] 0x80071a8c
[35476.740000] [<8319ca4c>] 0x8319ca4c
[35476.750000] [<80071b40>] 0x80071b40
[35476.750000] [<8319ca4c>] 0x8319ca4c
[35476.750000] [<801e0614>] 0x801e0614
[35476.760000] [<8007c6c0>] 0x8007c6c0
[35476.760000] [<83266ae4>] 0x83266ae4
[35476.770000] [<8326450c>] 0x8326450c
[35476.770000] [<80076b70>] 0x80076b70
[35476.770000] [<80077094>] 0x80077094
[35476.780000] [<800772a0>] 0x800772a0
[35476.780000] [<800a8540>] 0x800a8540
[35476.780000] [<800774d4>] 0x800774d4
[35476.790000] [<8006316c>] 0x8006316c
[35476.790000] [<80063340>] 0x80063340
[35476.790000] [<80095290>] 0x80095290
[35476.800000] [<80064ba8>] 0x80064ba8
[35476.800000] [<80063360>] 0x80063360
[35476.800000] [<802e68b0>] 0x802e68b0
[35476.810000] [<8030c660>] 0x8030c660
[35476.810000] [<802e60dc>] 0x802e60dc
[35476.810000]
[35476.820000] ---[ end trace df67f29eee049456 ]---
[42934.550000] br-wan: received packet on wlan0-1 with own address as source address
[42937.550000] br-wan: received packet on wlan0-1 with own address as source address
Bridge is still holding, but with these errors is only a matter of time before it looses connection to the main AP. Will let this run as long as it holds though and report back if any other errors occur. Thanks!
Instead of just:
[29402.410000] br-wan: received packet on wlan0-1 with own address as source address
Is now including this with the log as well:
[29398.480000] br-wan: received packet on wlan0-1 with own address as source address
[29402.410000] br-wan: received packet on wlan0-1 with own address as source address
[35476.520000] ------------[ cut here ]------------
[35476.520000] WARNING: at /home/user/gargoyle/ar71xx-src/build_dir/linux-ar71xx_generic/compat-wireless-2013-06-27/net/mac80211/rx.c:3318 0x8319ca4c()
[35476.540000] Rate marked as an HT rate but passed status->rate_idx is not an MCS index [0-76]: 78 (0x4e)
[35476.550000] Modules linked in: uvcvideo fuse gspca_zc3xx gspca_ov534 gspca_main videobuf2_vmalloc videobuf2_memops videobuf2_core qcserial option usb_wwan v4l2_common videodev ums_usbat ums_sddr55 ums_sddr09 ums_karma ums_jumpshot ums_isd200 ums_freecom ums_datafab ums_cypress ums_alauda sierra_net(O) sierra(O) usbserial usblp usbnet cdc_acm i2c_dev ath79_wdt ledtrig_usbdev ledtrig_netdev xt_set(O) ip_set_list_set(O) ip_set_hash_netport(O) ip_set_hash_netiface(O) ip_set_hash_net(O) ip_set_hash_ipportnet(O) ip_set_hash_ipportip(O) ip_set_hash_ipport(O) ip_set_hash_ip(O) ip_set_bitmap_port(O) ip_set_bitmap_ipmac(O) ip_set_bitmap_ip(O) ip_set(O) ebt_among ebt_802_3 nfnetlink xt_IMQ imq ipt_weburl ipt_webmon ipt_timerange nf_nat_tftp nf_conntrack_tftp nf_nat_snmp_basic nf_conntrack_snmp nf_nat_sip nf_conntrack_sip nf_nat_pptp nf_conntrack_pptp nf_nat_h323 nf_conntrack_h323 nf_nat_proto_gre nf_conntrack_proto_gre nf_nat_amanda nf_conntrack_amanda nf_conntrack_broadcast nf_nat_irc nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp xt_iprange xt_HL xt_hl xt_ecn ipt_ECN xt_CLASSIFY xt_time xt_tcpmss xt_statistic xt_mark xt_length xt_DSCP xt_dscp xt_string xt_layer7 xt_quota xt_pkttype xt_physdev xt_owner ipt_bandwidth ipt_REDIRECT ipt_NETMAP ipt_MASQUERADE iptable_nat nf_nat xt_recent xt_helper xt_connmark xt_connbytes pptp pppoe xt_conntrack xt_CT xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables nfsd nfs msdos ip_gre gre tun ppp_async ppp_generic slhc vfat fat lockd sunrpc hfsplus ath9k(O) ath9k_common(O) ath9k_hw(O) ath(O) nls_utf8 nls_koi8_r nls_iso8859_2 nls_iso8859_15 nls_iso8859_13 nls_iso8859_1 nls_cp866 nls_cp852 nls_cp850 nls_cp775 nls_cp437 nls_cp1251 nls_cp1250 mac80211(O) ts_fsm ts_bm ts_kmp crc_ccitt exportfs cfg80211(O) compat(O) input_core arc4 aes_generic usb_storage ohci_hcd ehci_hcd sd_mod ext4 jbd2 mbcache usbcore usb_common scsi_mod nls_base crc16 crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[35476.730000] Call Trace:[<80279840>] 0x80279840
[35476.740000] [<80279840>] 0x80279840
[35476.740000] [<80071a8c>] 0x80071a8c
[35476.740000] [<8319ca4c>] 0x8319ca4c
[35476.750000] [<80071b40>] 0x80071b40
[35476.750000] [<8319ca4c>] 0x8319ca4c
[35476.750000] [<801e0614>] 0x801e0614
[35476.760000] [<8007c6c0>] 0x8007c6c0
[35476.760000] [<83266ae4>] 0x83266ae4
[35476.770000] [<8326450c>] 0x8326450c
[35476.770000] [<80076b70>] 0x80076b70
[35476.770000] [<80077094>] 0x80077094
[35476.780000] [<800772a0>] 0x800772a0
[35476.780000] [<800a8540>] 0x800a8540
[35476.780000] [<800774d4>] 0x800774d4
[35476.790000] [<8006316c>] 0x8006316c
[35476.790000] [<80063340>] 0x80063340
[35476.790000] [<80095290>] 0x80095290
[35476.800000] [<80064ba8>] 0x80064ba8
[35476.800000] [<80063360>] 0x80063360
[35476.800000] [<802e68b0>] 0x802e68b0
[35476.810000] [<8030c660>] 0x8030c660
[35476.810000] [<802e60dc>] 0x802e60dc
[35476.810000]
[35476.820000] ---[ end trace df67f29eee049456 ]---
[42934.550000] br-wan: received packet on wlan0-1 with own address as source address
[42937.550000] br-wan: received packet on wlan0-1 with own address as source address
Bridge is still holding, but with these errors is only a matter of time before it looses connection to the main AP. Will let this run as long as it holds though and report back if any other errors occur. Thanks!