Gargoyle 1.11.0 Release Candidate 5

Want to share your OpenWrt / Gargoyle knowledge? Implemented a new feature? Let us know here.

Moderator: Moderators

ViBE
Posts: 152
Joined: Sun Apr 19, 2015 6:58 pm

Re: Gargoyle 1.11.0 Release Candidate 5

Postby ViBE » Tue Feb 05, 2019 12:17 pm

Lantis wrote:“Qualcomm Atheros IPQ40XX”

no such target on the list. not even Qualcomm. i don't get this.

ghorvath
Posts: 46
Joined: Thu Sep 29, 2016 12:03 pm

Re: Gargoyle 1.11.0 Release Candidate 5

Postby ghorvath » Tue Feb 05, 2019 3:53 pm

Lantis wrote:
ghorvath wrote:Seems to work fine on Youku YK1, upgraded from RC2 with preserving settings.

There is one thing, though. I had to restart the router several times until it was willing to act as a gateway for the machines on my LAN. The router itself was accessing the internet, DNS seemed to work fine, but ping 8.8.8.8 was only receiving packets if I gave the command from the gargoyle router, and not if I gave it on any of my local machines.

Trying to reboot any my local machines didn't help at all. There were no configuration changes on any of my local machines or on the router between firmware upgrade. Finally, 3 reboots of the router seemed to fix the problem.

I am wondering if this is intended behaviour, or gargoyle specific problem, or maybe some general LAN settings problem, or something else? Anyone ever experience anything similar?


Funnily enough, i saw this exact same behaviour yesterday.
I've never seen it before that, or seen it since.

If someone found a way to reproduce the issue every time, i will fix it.


Any update on this? This just happened again out of the blue on my router. No reboot, nothing, it just happened.

Reboot didn't help.

Interestingly, I can access the router from outside, and I can ssh onto my each internal machine from outside via ssh tunnel through the router. The internal machines see the router, can ping it, but cannot access the outside world.

ping google.com works properly from the router, but not from any of the internal machines.
ping 8.8.8.8 is exactly the same.

I am lost now, that even reboot doesn't help.... Any help/ideas would be appreciated.
Thanks!

Edit: The 6th (!) reboot helped. However, I really have no clue what can go on here....

Lantis
Moderator
Posts: 5194
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.11.0 Release Candidate 5

Postby Lantis » Tue Feb 05, 2019 5:32 pm

ViBE wrote:
Lantis wrote:“Qualcomm Atheros IPQ40XX”

no such target on the list. not even Qualcomm. i don't get this.


Are you on the git branch “base_on_openwrt_remerge”?
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

Lantis
Moderator
Posts: 5194
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.11.0 Release Candidate 5

Postby Lantis » Wed Feb 06, 2019 6:06 am

doug_porsche wrote:
ispyisail wrote:
doug_porsche wrote:Not sure the Connection > Basic > “Use Custom MAC address” is being respected?
I have this set to c1:04:15:90:f7:cf and the “Use Custom MAC Address” box checked

But
Status > Overview > WAN > WAN MAC Address reports C4:04:15:90:F7:EF
Status > Overview > Lan > LAN MAC Address reports C4:04:15:90:F7:EE
Cable Router reports a MAC of c4:04:15:90:f7:ef


I have saved the settings/rebooted the gargoyle router/powered off & on the gargoyle router to no effect


How do old versions work?

Is this a 1.11.x problem or has it been this way forever?


First time I have tried this feature, so 1.11.x is all I can test currently


So I haven’t had a chance to actually test it... but I’m pretty sure it works fine (based on previous testing).
My current theory is you’ve set an invalid MAC Address.

Invalid MAC Address you say? Is there such a thing?
Yeah, kind of.
The LSB of the first octect in a MAC address must be 0 otherwise it is a “group address”.
Your address first octect was “C1” which is
1100 0001
MSB —> LSB
Noting that your LSB is 1
Setting the first octect to C0, C2, C4 etc etc (basically any even number + A, C E) should make it work.

Apologies for the lecture lol.

Now... should the GUI protect you from this mistake? Probably. Let me look into that.
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases

ViBE
Posts: 152
Joined: Sun Apr 19, 2015 6:58 pm

Re: Gargoyle 1.11.0 Release Candidate 5

Postby ViBE » Wed Feb 06, 2019 4:51 pm

Lantis wrote:
ViBE wrote:
Lantis wrote:“Qualcomm Atheros IPQ40XX”

no such target on the list. not even Qualcomm. i don't get this.


Are you on the git branch “base_on_openwrt_remerge”?

i did only ispyisail told me before and nothing else: viewtopic.php?p=51405#p51405

and installed npm. that's all what i did yet.

ispyisail
Moderator
Posts: 4705
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.11.0 Release Candidate 5

Postby ispyisail » Wed Feb 06, 2019 5:08 pm

Code: Select all

git checkout base_on_openwrt_remerge


Those instructions are for "Master"

Need to switch build tree

Image

We should be building off "Master"..............................

ViBE
Posts: 152
Joined: Sun Apr 19, 2015 6:58 pm

Re: Gargoyle 1.11.0 Release Candidate 5

Postby ViBE » Wed Feb 06, 2019 5:13 pm

ispyisail wrote:

Code: Select all

git checkout base_on_openwrt_remerge


Those instructions are for "Master"

Need to switch build tree

Image

We should be building off "Master"..............................

i thought. but was not sure how this exactly works. what should do after changing tree?

ispyisail
Moderator
Posts: 4705
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.11.0 Release Candidate 5

Postby ispyisail » Wed Feb 06, 2019 5:14 pm

Code: Select all

make FULL_BUILD=true


or

Code: Select all

make custom

ispyisail
Moderator
Posts: 4705
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Gargoyle 1.11.0 Release Candidate 5

Postby ispyisail » Wed Feb 06, 2019 5:21 pm

sorry forgot to add

Code: Select all

git pull


to update

Lantis
Moderator
Posts: 5194
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Gargoyle 1.11.0 Release Candidate 5

Postby Lantis » Wed Feb 06, 2019 5:23 pm

git checkout -b base_on_openwrt_remerge
make distclean
make custom
Routers: Various ar71xx/mvebu/x86-64
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases


Return to “Show / Tell / Contribute”

Who is online

Users browsing this forum: No registered users and 2 guests