Open VPN GUI

Suggest improvements and new features for Gargoyle.

Moderator: Moderators

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Open VPN GUI

Post by ispyisail »


ng3700v2
Posts: 34
Joined: Thu Mar 17, 2011 9:02 am

Re: Open VPN GUI

Post by ng3700v2 »

hnl_dk wrote: for PPTP VPN
TCP Port 1723
UDP Port 500

for L2TP VPN
TCP Port 1701
UDP Port 500

for IPSec
UDP Port 500
Yes, I am aware of the port forwarding requirements. If you look at my post from March 17th of 2011 (http://www.gargoyle-router.com/phpbb/vi ... =vpn#p5931), I state the following: "I forwarded the necessary ports (1723,500) to the correct IP"


And ispyisail:
ispyisail wrote:this is the best i could find

http://www.blackmanticore.com/51f359dfe ... 633e2e7c2b
Yes, I found this article a while back and tried to follow it. He was using an older OpenWRT version so some of the packages have combined and/or changed names. I can get all of the packages to install correctly, but the kernel modules fail to load either via reboot or "insmod" commands. I've gone on several package installation rampages in attempt to get lucky enough to grab the missing symbols, but I always come up short


"PPTP uses IP protocol 47, designed for "General Routing Encapsulation" or GRE packets. A common mistake in configuring firewalls for use with PPTP is to open PPTP port 1723 (allowing connections to be established) but forget to forward GRE protocol type 47 (denying port data from passing through the tunnel)."

-- I can't get the kernel modules responsible for forwarding the GRE protocol to load!!

"lsmod | grep -i gre" comes up empty.

User avatar
DoesItMatter
Moderator
Posts: 1373
Joined: Thu May 21, 2009 3:56 pm

Re: Open VPN GUI

Post by DoesItMatter »

See here:

https://forum.openwrt.org/viewtopic.php?id=27777

and here:

http://wiki.openwrt.org/doc/howto/vpn.nat.pptp

Is this the new module?

kmod-ipt-nathelper-extra
:twisted: Soylent Green Is People! :twisted:
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400

hnl_dk
Moderator
Posts: 408
Joined: Mon Aug 29, 2011 12:37 pm

Re: Open VPN GUI

Post by hnl_dk »

Did you install kmod-gre ?
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4

ng3700v2
Posts: 34
Joined: Thu Mar 17, 2011 9:02 am

Re: Open VPN GUI

Post by ng3700v2 »

DoesItMatter wrote:See here:

https://forum.openwrt.org/viewtopic.php?id=27777

and here:

http://wiki.openwrt.org/doc/howto/vpn.nat.pptp

Is this the new module?

kmod-ipt-nathelper-extra

Yes, if you look at my December 9th post: http://www.gargoyle-router.com/phpbb/vi ... =vpn#p9254 you will see that I do the following:

Code: Select all

opkg install kmod-ipt-conntrack kmod-ipt-conntrack-extra kmod-ipt-nat kmod-ipt-nat-extra kmod-ipt-nathelper [b]kmod-ipt-nathelper-extra[/b]
opkg install pptp pptpd
Still can't get the modules to load.
hnl_dk wrote:Did you install kmod-gre ?
Yes, I have installed kmod-gre too (even though it's not listed in the original package list above) -- still can't get the modules to load.


Would anyone else be willing to try installing any/all of these packages to see if they can get any of the "gre" modules to load?

ng3700v2
Posts: 34
Joined: Thu Mar 17, 2011 9:02 am

Re: Open VPN GUI

Post by ng3700v2 »

Anyone???

yc3948
Posts: 164
Joined: Sat Sep 10, 2011 1:04 am

Re: Open VPN GUI

Post by yc3948 »

We really need VPN on gargoyle
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf

ispyisail
Moderator
Posts: 5185
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Open VPN GUI

Post by ispyisail »

Looks like this is the next new big feature

yc3948
Posts: 164
Joined: Sat Sep 10, 2011 1:04 am

Re: Open VPN GUI

Post by yc3948 »

ispyisail wrote:Looks like this is the next new big feature
yes ;)
Buffalo WZR-HP-G300NH2 DD-WRT v24SP2-MULTI (10/31/11) std
Buffalo WZR-HP-G300NH Gargoyle 1.5.9+1f082daf
Linksys WRT54GL Gargoyle 1.4.4
TP-Link TL-WR1043ND Gargoyle 1.5.9+1f082daf

varma
Posts: 37
Joined: Thu Feb 17, 2011 7:53 pm

Re: Open VPN GUI

Post by varma »

Hi everyboby!
Are there news about the implementation of a VPN servere in Gargoyle?
In case it would be great to implement a protocol supported by the smartphones (iPhone, iPod, Android)

I will follow this topic!
Tp-Link WR1043ND v1.4 using Gargoyle 1.7.2
Tp-Link WDR3600 v1.5 using OpenWRT CC by SamKnows

Image

Post Reply