Logging level selection via GUI
Moderator: Moderators
Logging level selection via GUI
My logs are getting spammed with WPA: group key handshake completed (RSN) messages. It would be nice if there was a GUI option to reduce debug messages so that logs can get only criticals.
Re: Logging level selection via GUI
Have you already found a solution to your question?
You can easily do that by issuing a few commands through SSH:
Where
You can easily do that by issuing a few commands through SSH:
Code: Select all
uci set system.system.conloglevel='4'
uci commit
See what loglevel number fits your needs. OpenWRT/Gargoyle's default is set to 7 I believe.OpenWRT Wiki wrote: Number between 1-8. The maximum log level for kernel messages to be logged to the console. Only messages with a level lower than this will be printed to the console. Higher level messages have lower log level number. Highest level messages are ones with log level 0. If you want more verbous messages in console put conloglevel to 8 if you want less messages lower conloglevel to 4 or even less.
TP-Link Archer C7 v2 - Gargoyle 1.12.X
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1
TP-Link WR842ND v2 - Gargoyle 1.10.X
TP-Link RE450 AC v2 - Stock FW 1.0.4
TP-Link WA850RE v1.2 - LEDE 17.01.1