Support for TP-Link TL-WR710n

Suggest improvements and new features for Gargoyle.

Moderator: Moderators

Lantis
Moderator
Posts: 6394
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Support for TP-Link TL-WR710n

Post by Lantis »

They look good!
I’ll try to keep in the back of my mind to enable that device in 1.15 by default if it seems to work ok :)

Also I know the documentation is scattered, but I did mention the python thing here
https://github.com/ericpaulbishop/gargo ... requisites

Well done on persisting and getting the right outcome.

One more thing I’ll note for anyone else reading. The automatic use all cpu cores code wasn’t working a while ago, and thanks to a helpful contributor it now is. The downside is that if a build fails, it is often impossible to figure out what went wrong because output messages are in a jumbled order.
If a build fails, i would recommend starting it again immediately with “BUILD_THREADS=1” which should make the failure more clear. It will be significantly slower.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

ispyisail
Moderator
Posts: 5033
Joined: Mon Apr 06, 2009 3:15 am
Location: New Zealand

Re: Support for TP-Link TL-WR710n

Post by ispyisail »

Thank you

heilbronn
Posts: 23
Joined: Sun Apr 17, 2022 8:52 am
Location: Germany

Compiled for the TP-Link TL-WR810n, too

Post by heilbronn »

heilbronn wrote:
Sat Apr 30, 2022 7:30 pm
BTW: I put up my full notes on *Building Gargoyle for the TL-WR710N* on Github: https://github.com/sheilbronn/Gargoyle-for-TL-WR710N
...
After successfully building images for the TL-WR810n exactly the same way, I integrated that into the description linked above. My build went successfull (=producing images), but I haven't tried installing them yet, since my only TL-WR810n is running Gluon at the moment. Therefor, you might want to drop a line if your installation went fine. I'm happy to provide my binary image if some is interested...

BTW: The TL-WR810n's versions are 8MB/64MB, so they should be fine for the next OpenWrt versions, too.

Feel free to copy/use this in the next Gargoyle release :)

Post Reply