Router Firmware Requests

[Lantis]

I've sent out 3 copies of the WR1043BD V3 firmware to be tested.

[NineIguanas]

Notes from Lantis: Accepted
I've sent out 3 copies of the WR1043BD V3 firmware to be tested.

Awesome, thank you

[meazz1]

I've sent out 3 copies of the WR1043BD V3 firmware to be tested.

Thanks, been waiting for this!

[Lantis]

Notes from Lantis: Accepted
I've sent out 3 copies of the WR1043BD V3 firmware to be tested.

Awesome, thank you

One of them went to you. Check your inbox

Please let me know how it goes. One user reported an IMQ error which was interesting but I'm looking for other people having the same problem.

[meazz1]

TP Link TL WR1043 v3.0
+1 for above request! Would be much appreciated. This chassis is a great work horse with a good radio section - I install a few every week!

Apparently it's the same hardware as v2, just needs the "h/w identifier" code changed.

Router Model: TP Link TL WR1043 v3.0
Link to Openwrt wiki: https://wiki.openwrt.org/toh/hwdata/tp- ... r1043nd_v3
Is it supported in Openwrt? Yes
Does it have >= 4MB of flash? Yes
Does it have >= 8MB of flash? Yes
Does it have USB support? Yes

It's been few hours but everything seems stable and running. Setup plugins, adblock and also running as access point, no issue whatsoever.


Notes from Lantis:
Accepted

[NineIguanas]

Re TPLink WR1043NDv3, test firmware provided: loaded fine & appears to be working normally so far.

Not using any add-ons or plugins.

I find I have to shorten the gargoyle file name for the factory firmware to accept the "upgrade" - but have been doing this for ages (it's not a new issue).

[BrotoZeno]

lantis, pls let me try gargoyle in my router

Router Model: TP link wr841nd v10
Link to Openwrt wiki: https://wiki.openwrt.org/toh/tp-link/tl-wr841nd
Link to openWRT file: https://downloads.openwrt.org/chaos_cal ... actory.bin
Is it supported in Openwrt? Yes
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? No
Does it have USB support? No

thanks
sorry for being my first post here


Notes from Lantis:
Rejected - 4MB of flash

[dandersen]

Router Model: Netgear R7000
Link to Openwrt wiki: https://wiki.openwrt.org/toh/netgear/r7000
Is it supported in Openwrt? Yes
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? Yes
Does it have USB support? Yes

Would love this, even if no Wi-Fi support.


Notes from Lantis:
Accepted

[Lantis]

Router Model: Netgear R7000
Link to Openwrt wiki: https://wiki.openwrt.org/toh/netgear/r7000
Is it supported in Openwrt? Yes
Does it have > 4MB of flash? Yes
Does it have > 8MB of flash? Yes
Does it have USB support? Yes

Would love this, even if no Wi-Fi support.


Notes from Lantis:
Accepted

dandersen has reported this image as working.
However, due to the lack of wifi support in this router, the Connection -> Basic page does not behave well (as expected).
It is still fully configurable using the CLI.
The WAN interface would also not come online. Your mileage may vary!

Netgear R7000 - NO WIFI SUPPORT

[Lantis]

Hi guys, is it possible to support this router too?
Thank you.

Router Model: Meraki MR12
Link to Openwrt wiki: https://wiki.openwrt.org/toh/meraki/mr12
Is it supported in Openwrt? Yes , since r45726 (CC trunk)
Does it have >= 4MB of flash? Yes 16MB
Does it have >= 8MB of flash? Yes 16MB
Does it have USB support? No


Notes from Lantis:
Accepted

rt_rex has reported this image as working.
As in openwrt, one of the LAN ports doesn't function. This is supposedly a driver issue.

Download: http://lantisproject.com/gargoyle_custom/Meraki-MR12/