Best settings for gaming QoS+DSCP

Report issues relating to bandwith monitoring, bandwidth quotas or QoS in this forum.

Moderator: Moderators

Lantis
Moderator
Posts: 6049
Joined: Mon Jan 05, 2015 5:33 am
Location: Australia

Re: Best settings for gaming QoS+DSCP

Post by Lantis »

If you ping exceeds the level set in the active congestion controller, it will shape your connection to get latency under control.
Looking at your connection, you have VERY high latency. ACC is just doing what it is supposed to do.

From a low speed, if your link demands it, AND your latency is under control, it will allow it to speed up again.
If your connection is garbage, there's nothing that can be done except for turning it off and living with it.
http://lantisproject.com/downloads/gargoyle_ispyisail.php for the latest releases
Please be respectful when posting. I do this in my free time on a volunteer basis.

Volaris
Posts: 176
Joined: Thu May 01, 2014 1:02 pm

Re: Best settings for gaming QoS+DSCP

Post by Volaris »

The only suggestions I have would be to try to disable that minRTT setting in the Priority service class so ACC isn't as harsh with ping times.

Since your ping time is high, try using the default ping target instead of 1.1.1.1 to see if that makes a difference.
QoS Tip: Don't complicate your QoS settings. Gargoyle evenly splits available bandwidth between active devices as needed. Just delete all your classification rules and leave only one normal service class and you're done. No more arguing over bandwidth.

-taz-
Posts: 33
Joined: Wed Oct 23, 2019 11:21 pm

Re: Best settings for gaming QoS+DSCP

Post by -taz- »

Problem solved

Alone, change the ping destination.

The rest, I still use it as shown in the screenshots.

Post Reply