Gargoyle 1.5.1 is not working in Client+AP mode
Moderator: Moderators
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
I´ve got news..... Gargoyle has a secret to do it work.... wait up to tomorrow!!
Regards!!
Regards!!
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Hello again dudes!!!
As I said during my last post, I had given up on Gargoyle, but I noticed that was released 1.5.2 version, which by the way it was a huge surprise coming so fast to fix issues...
By all means, this new version didn't change anything my problem, so these fixes couldn't help me again. But it's always better to have the last version "who really knows??!"
Well, going back to this topic, I figured out what's really going on in Gargoyle and my router 1043ND. Let's see below:
Scene A
1) As you can see in second picture, I set Static IP using one from my WAN router 192.168.0.X, but only doing it didn't work out at all.
2) But the huge TRICK was to set some DNS server, in this case 192.168.0.1 manually, and after that magic happens...
3) Apply and a new SID is created possibling to navigate on Internet without issues. OHOHOHO WHAT A FREAKING MIRACLE!!!
Scene B
1) By the way I'm a guy restless, so I had to try via DHCP connection, and changing to it even setting DNS manually dind't work more.
What the fuck?? why?? DNS/DHCP problem ???
So, after all this test, I'm coming back to ask everybody and moderators.
What the hell Gargoyle has? As you can notice the problem wasn't with WPA2-PSK as moderators said.
In my opinion Gargoyle has erros with DHCP/DNS in Client+AP mode!!!
So, what to do now?? Let me know!!
Regards...
As I said during my last post, I had given up on Gargoyle, but I noticed that was released 1.5.2 version, which by the way it was a huge surprise coming so fast to fix issues...
By all means, this new version didn't change anything my problem, so these fixes couldn't help me again. But it's always better to have the last version "who really knows??!"
Well, going back to this topic, I figured out what's really going on in Gargoyle and my router 1043ND. Let's see below:
Scene A
1) As you can see in second picture, I set Static IP using one from my WAN router 192.168.0.X, but only doing it didn't work out at all.
2) But the huge TRICK was to set some DNS server, in this case 192.168.0.1 manually, and after that magic happens...
3) Apply and a new SID is created possibling to navigate on Internet without issues. OHOHOHO WHAT A FREAKING MIRACLE!!!
Scene B
1) By the way I'm a guy restless, so I had to try via DHCP connection, and changing to it even setting DNS manually dind't work more.
What the fuck?? why?? DNS/DHCP problem ???
So, after all this test, I'm coming back to ask everybody and moderators.
What the hell Gargoyle has? As you can notice the problem wasn't with WPA2-PSK as moderators said.
In my opinion Gargoyle has erros with DHCP/DNS in Client+AP mode!!!
So, what to do now?? Let me know!!
Regards...
- Attachments
-
- DHCP
- dhcp.PNG (42.24 KiB) Viewed 7234 times
-
- Static IP
- hardcode.PNG (33.51 KiB) Viewed 7234 times
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
So when you were using OpenWRT 10.03.1 on the WR1043ND
did you have it working how you wanted?
I.e. OpenWRT 10.03.1 works, but 1.5.2 doesn't work unless you
use the 192.168.0.1 as a DNS?
BTW - is this your main ap?
http://support.dlink.com/emulators/di524/h_wizard.html
did you have it working how you wanted?
I.e. OpenWRT 10.03.1 works, but 1.5.2 doesn't work unless you
use the 192.168.0.1 as a DNS?
BTW - is this your main ap?
http://support.dlink.com/emulators/di524/h_wizard.html
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Hi DoesItMatter,
Not really, as you can read above I said that OpenWRT 10.03.1 via LUCI interface offers much more options to config linux and looks awesome...
I cound´t do it to work initially in both routers, righ now I could in Gargoyle but not 100% as I wrote in last post.
So when I set a DNS for static IP it works, but via DHCP not even setting DNS manually goes.
My next step is testing config files created by Gargoyle in OpenWRT directly, because Gargoyle file uses 6,12 MB and OpenWRT just 3,25 MB, huge difference in memory router.
I don´t know why Gargoyle size is increasing so much... for god´s sake, are you putting stones in it? I WANT A FIT VERSION!!!
Let me know...
Regards,
Not really, as you can read above I said that OpenWRT 10.03.1 via LUCI interface offers much more options to config linux and looks awesome...
I cound´t do it to work initially in both routers, righ now I could in Gargoyle but not 100% as I wrote in last post.
So when I set a DNS for static IP it works, but via DHCP not even setting DNS manually goes.
My next step is testing config files created by Gargoyle in OpenWRT directly, because Gargoyle file uses 6,12 MB and OpenWRT just 3,25 MB, huge difference in memory router.
I don´t know why Gargoyle size is increasing so much... for god´s sake, are you putting stones in it? I WANT A FIT VERSION!!!
Let me know...
Regards,
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
TOR takes around 1MB
All the extra QoS / BW Monitor / Quota stuff takes at least
another 1MB
Stick with OpenWRT 10.03.1 if you want the lean
If you drop down to 1.4.5 - its almost identical to 1.5.2
and you save close to 1MB of file size by dropping to 1.4.5
But there is no TOR, and no 5GHZ stuff, which your router doesn't
have anyway, so flash 1.4.5 instead of the 1.5.2 version.
All the extra QoS / BW Monitor / Quota stuff takes at least
another 1MB
Stick with OpenWRT 10.03.1 if you want the lean
If you drop down to 1.4.5 - its almost identical to 1.5.2
and you save close to 1MB of file size by dropping to 1.4.5
But there is no TOR, and no 5GHZ stuff, which your router doesn't
have anyway, so flash 1.4.5 instead of the 1.5.2 version.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
Re: Gargoyle 1.5.1 is not working in Client+AP mode
What happens if you simply set "DNS Servers" to "Google DNS Servers"?
And try to set "Force Clients To Use Router DNS Servers" to yes.
As it sounds like you are using your old config, even though you have had trouble. Make sure that you have not made a wrong setting in the firewall settings or the routing settings.
I would simply start the config from a fresh, if I were you (if you do not find the error).
And I would not use a backup from gargoyle on openwrt and vise versa.
If you have done that earlier, could that have been the reason for your problems, as they are not totally compatible.
And try to set "Force Clients To Use Router DNS Servers" to yes.
As it sounds like you are using your old config, even though you have had trouble. Make sure that you have not made a wrong setting in the firewall settings or the routing settings.
I would simply start the config from a fresh, if I were you (if you do not find the error).
And I would not use a backup from gargoyle on openwrt and vise versa.
If you have done that earlier, could that have been the reason for your problems, as they are not totally compatible.
Router: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
AP: TL-WR1043ND - Gargoyle 1.5.4
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Before all, doing a hard reset....
Power up the router
When SYS button starts to blink, press and hold the QSS button till SYS starts to blink faster
Telnet to 192.168.1.1. No password needed.
Erase user space data with
mtd -r erase rootfs_data
By the way, no matter which DNS IP is... just the fact to use one solves, via DHCP doesn´t go!!
edit:ispy
Power up the router
When SYS button starts to blink, press and hold the QSS button till SYS starts to blink faster
Telnet to 192.168.1.1. No password needed.
Erase user space data with
mtd -r erase rootfs_data
By the way, no matter which DNS IP is... just the fact to use one solves, via DHCP doesn´t go!!
edit:ispy
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Hi all!!
Any news up to now???
Regards!!
Any news up to now???
Regards!!
- DoesItMatter
- Moderator
- Posts: 1373
- Joined: Thu May 21, 2009 3:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
Only news so far is that it is working for most of us.
The only true way you will ever validate that there are issues with
Gargoyle / OpenWRT is to try different hardware.
Having the issue with 2 specific routers does not prove a problem.
If you change out the hardware and the problem persists, then
it could definitely point to some type of bug.
I really suspect if you replace your D-Link you will have much
better luck with Gargoyle.
The only true way you will ever validate that there are issues with
Gargoyle / OpenWRT is to try different hardware.
Having the issue with 2 specific routers does not prove a problem.
If you change out the hardware and the problem persists, then
it could definitely point to some type of bug.
I really suspect if you replace your D-Link you will have much
better luck with Gargoyle.
Soylent Green Is People!
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
2x Asus RT-N16 = Asus 3.0.0.4.374.43 Merlin
2x Buffalo WZR-HP-G300NH V1 A0D0 = Gargoyle 1.9.x / LEDE 17.01.x
2x Engenius - ESR900 Stock 1.4.0 / OpenWRT Trunk 49400
-
- Posts: 65
- Joined: Mon Dec 05, 2011 7:56 pm
Re: Gargoyle 1.5.1 is not working in Client+AP mode
So do I... $$$ troubles!