Hello guys, yesterday I got the Airlive AC1200-R. It's a dual band router capable of WISP/AP which I need. The problem is I need it to connect to a 5GHz a/c router and create another 2,4GHz AP.
It works. The problem is that the 5GHz a/c band only reaches 25Mbit even with 100% signal strength (maximum would be 150Mbit). The web interface is somewhat glitchy like setting a WISP on 5GHz band leaves the operation mode set as AP while still getting the signal from the other router and routing it to 2,4GHz/ethernet.
I want to ask if someone else have these problems on some other piece of hardware, the chipset is MT7620A/MT7612EN. Or if anyone knows about alternate firmware for this one.
Sadly the router seems not to be very common but it looks like a decent one if there were no problems with the slow 5GHz.
Airlive AC1200-R (Ovislink)
Moderator: Moderators
Re: Airlive AC1200-R (Ovislink)
are you running gargoyle firmware?
Re: Airlive AC1200-R (Ovislink)
I am not - I would definetly like to but I am not sure if there is a compatible version.
Re: Airlive AC1200-R (Ovislink)
The solution is, of course, but you would violate the RFC standard.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0
http://gargoyle.romanhk.cz custom builds by gargoyle users
Re: Airlive AC1200-R (Ovislink)
Ok the problem is it only uses 20MHz band on channel 36 while set on auto (20/40/80MHz). The other router is available on 80MHz band channel 42, but I can't force the router to use it, while mobile phones/laptops are able to do so.