two different IP addresses how to connect

Report wireless and/or network connectivity problems in this forum.

Moderator: Moderators

Post Reply
stillo
Posts: 1
Joined: Thu Apr 22, 2021 4:05 am

two different IP addresses how to connect

Post by stillo »

Hello,
I have a problem with the Gargoyle settings for 2 IP addresses.
HP T620 server with preloaded Proxmox and Home Assistant.
Huawei SUN2000 inverter with IP address 192.168.8.1 (connection via internal Wifi of the inverter and no possibility of altering the addressing)
Local network 192.168.1.1

The inverter connects to the router wirelessly, and then the router connects to the local network via a cable.

How to set the router so that the Inverter 8.1 is visible in the 1.1 network.

RomanHK
Posts: 774
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: two different IP addresses how to connect

Post by RomanHK »

Try changing the subnet mask to 255.255.0.0

Warning: also computers and everything connected to the network will have a new subnet mask.
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

RomanHK
Posts: 774
Joined: Sat May 04, 2013 4:18 pm
Location: Czech Republik

Re: two different IP addresses how to connect

Post by RomanHK »

... but I'm surprised you can't change the IP address from 192.168.8.1 to another. According to the instructions, it should work.
https://support.huawei.com/enterprise/e ... 0215252984

Image
Turris Omnia with OpenWrt 21.02 - Tested
Linksys WRT3200ACM with Gargoyle 1.13.x
TL-WR1043ND v2 with Gargoyle 1.10.0

http://gargoyle.romanhk.cz custom builds by gargoyle users

Post Reply