Search found 5185 matches

by ispyisail
Wed May 06, 2009 2:59 pm
Forum: Hardware / Installation Issues
Topic: The OM1P routers from open-mesh not coming up after flashing
Replies: 8
Views: 13207

Re: The OM1P routers from open-mesh not coming up after flashing

http://www.gargoyle-router.com/phpbb/viewtopic.php?f=8&t=119 I don't have one either OM1P People have been claiming they have successfully flashed the OM1P with openWRT and dd-wrt but there units keep rebooting. Im not sure why i care when i don't have one, but i guess i might be helping some one?
by ispyisail
Wed May 06, 2009 5:46 am
Forum: Hardware / Installation Issues
Topic: The OM1P routers from open-mesh not coming up after flashing
Replies: 8
Views: 13207

Re: The OM1P routers from open-mesh not coming up after flashing

Update

http://robin.forumup.it/viewtopic.php?t ... orum=robin

There is a link at the bottom of the thread with some code

Can you make any sense of it?
by ispyisail
Tue May 05, 2009 5:41 am
Forum: Hardware / Installation Issues
Topic: installing om fon2
Replies: 4
Views: 7127

Re: installing om fon2

i don't have a fon2 so i can't check

This web site says redboot is enabled?

http://wiki.fon.com/wiki/La_Fonera_2.0/zh

If all else fails get a serial cable
by ispyisail
Mon May 04, 2009 3:19 pm
Forum: Hardware / Installation Issues
Topic: installing om fon2
Replies: 4
Views: 7127

Re: installing om fon2

I got the same error with my ubiquiti Bullet

I suspect redboot is locked and your going to have to unlock it

I have not tried this myself but I would use a serial cable
by ispyisail
Sun May 03, 2009 1:34 am
Forum: Hardware / Installation Issues
Topic: Procedure to Edit "Redboot"?
Replies: 6
Views: 8492

Re: Procedure to Edit "Redboot"?

There is no files to edit like ROBIN

just type the commands in

Get into redboot then type this command

Code: Select all

fconfig
then keep typing......................etc

If it all goes wrong you can recover your device with a serial cable
by ispyisail
Sat May 02, 2009 3:32 pm
Forum: Hardware / Installation Issues
Topic: Procedure to Edit "Redboot"?
Replies: 6
Views: 8492

Re: Procedure to Edit "Redboot"?

After i sent the post i thought about suggesting the other method. If it goes wrong you will need a serial connection. I must try the command "fconfig -l" This is the full config RedBoot> fconfig Run script at boot: true Enter script, terminate with empty line >> fis load -l linux >> exec ...
by ispyisail
Sat May 02, 2009 8:34 am
Forum: Hardware / Installation Issues
Topic: Procedure to Edit "Redboot"?
Replies: 6
Views: 8492

Re: Procedure to Edit "Redboot"?

The easy way is the get a serial cable working

http://oldwiki.openwrt.org/OpenWrtDocs( ... nsole.html

There is more than one way of building a cable

http://z.cs.utexas.edu/wiki/parknet.wiki/console
by ispyisail
Fri May 01, 2009 3:54 am
Forum: General Discussion
Topic: using opendns - how
Replies: 5
Views: 7113

Re: using opendns - how

You need to read how-to setup OpenDNS from the OpenDNS web site

Access restrictions can olny happen with an OpenDNS account running. Otherwise OpenDNS will work like a normal DNS server

more reading required
by ispyisail
Fri May 01, 2009 3:42 am
Forum: Hardware / Installation Issues
Topic: Reflash Open-Mesh to Gargoyle
Replies: 8
Views: 10385

Re: Reflash Open-Mesh to Gargoyle

Update: I was finally able to get the FON flashed using "fonflash", but I had to preset the LAN adapter to a fixed IP of 192.168.1.3 to get it to sync up during the redboot period. It has to start out connected, or it will not connect during the 5 sec redboot period. After starting fonfla...
by ispyisail
Wed Apr 29, 2009 5:00 am
Forum: General Discussion
Topic: using opendns - how
Replies: 5
Views: 7113

Re: using opendns - how

Have you got a fixed IP address from your ISP?

Have you set up an account with OpenDNS?

Are your settings at OpenDNS correct?