Hello is it possible to add support for R7000 router please.
While possible, no I won’t sorry. It is a Broadcom device and therefore largely not worth the time and effort.
You are welcome to custom compile your own image that should be entirely possible.
The usteer package is installed by default on most profiles, others will need to install it. There is no GUI configuration for usteer except for being able to turn it on and off to help send AP client information between multiple Gargoyle routers on the same network (in a multi-AP setup for example)...
If I can’t figure it out though you may need to either accept it or try to investigate it yourself. Moderate NAT is perfectly fine for playing games anyway
No you don’t need to port forward ipv6 (unless you’re using NAT6), but you do need to open ports to devices.
I’m not confident this is handled by UPnP in Gargoyle
Well that’s good news! I’ll do some work to add these extra config items into the GUI in the future. I’ll try to find some time to check if they do anything different as far as UPnP in the OEM firmware. From what I can gather, Xbox requires the following ports opened: TCP: 3074 UDP: 88, 500, 3074, 3...
I flashed the stock firmware and compared what gl-inet change when you set "passthrough" mode on IPv6. Here's a comparison: https://www.diffchecker.com/E9LuxVT1/ In /etc/config/dhcp they set config dhcp 'lan' ... option dhcpv6 'relay' option ra 'relay' option ndp 'relay' The only bit you a...
Yes that's right. However, I've not used FireFox in ages and it's different enough that the instructions won't make much sense how I describe them. Lets change methods. Login with WinSCP (if you've not used that before, see here https://www.gargoyle-router.com/phpbb/viewtopic.php?t=8505) Navigate to...