Gargoyle Forum

Support for the router is present in Attitude Adjustment (which Garogyle is based on), but Gargoyle does not have a line in the default profile to build for WL-WR841NDv8.x routers. You can add '-tl-wr841n-v8-squashfs-' to gargoyle/targets/ar71xx/profiles/default/profile_images and try to compile it ...

I found this using The Google with "linux wireless power savings" 1st link:

http://wireless.kernel.org/en/users/Doc ... power-save

You could be using only 1 antenna because power savings is enabled.

look for rxantenna, txantenna & diversity here:
http://wiki.openwrt.org/doc/uci/wireless

The only publicly available Gargoyle builds after 1.5.10 that I am aware of are from ispyisail in this forum here: http://www.gargoyle-router.com/phpbb/viewforum.php?f=14 and by obsy/Cezary @ his forum @ http://eko.one.pl • the builds must be of i18n type (the default) • contain Gargoyle code newer ...

Sorry, I didn't see your pinging, only the timed outs I have a computer connected with a 2m cable to a 4300 (1.2) which is connected via 40 or so feet of Cat5e to a 3600 (1.1): 64 bytes from 192.168.1.2: icmp_seq=0 ttl=64 time=0.535 ms 64 bytes from 192.168.1.2: icmp_seq=1 ttl=64 time=0.299 ms 64 by...

The code has been committed to the gargoyle repository. The only way to use it is to compile yourself.

As I recall the original TP-Link firmware is 192.168.0.1. If you still have a DHCP lease, try to release it & renew.

Those aren't OpenWrt's bleeding edge (a term they actually use). The builds posted are after 1.5.10, but still on OpenWrt's Attitude Adjustment branch.

http://forum.whatismyip.com/f27/new-lin ... yip-t2288/

Apparently, now you have to register. I'll send Eric a PM regarding this issue. Thanks for digging into it.