Gargoyle Forum

By the way, CONNECTION > ROUTING gives
subnet mask of 255.255.248.0 in front of my modem's IP. Could that be my modem's subnet? Screenshot: https://nimb.ws/pqL9Nd

I used command logread. Is this log you mean?

https://pastebin.com/81iNxMKx

Hi, rebooting both devices didn't fix it. Router #2 still has no Internet access. A log from router 1 might reveal if it is refusing to give it an address for some reason. I figured out SSH access. But haven't been able to find a tutorial on Gargoyle site on how to output a log. What command shoudl ...

Hi Lantis, per your instructions, I set Router #2 on DHCP Wired. The ethernet going into its WAN port has Internet access. But the router does not. Here's my Basic Connection page: https://nimb.ws/gtO3IF Here's the status page: https://nimb.ws/YkxzBG There is no CURRENT IP in Intenet/WAN section. Th...

It might be difficult to find out the modems subnet if it only exposes your proper WAN address to you. You'll know if you're having a clash because your network will fail due to routing issues. Perhaps this issue has been what has been causing the issues. With my previous setup, Router #2 had Inter...

Hello, thanks so much for your response. LAN needs to be any subnet that isn't already taken by your modem and router #1 By subnet, you mean "Subnet mask"? Does the subnet modem and Router 1 have to be different from each other? If so, how do I determine the subnet of the modem? It is set ...

Hello, I am a newbie who thought networking is easy. Wrong! going a little crazy after trying to setup two networks, using one modem and two Linksys 1900ac modems, connected to each other via ethernet, both running Gargoyle 1.12.0. This is my attempt to start fresh by hopefully get someone to HOLD M...

Yes, I installed 1200 firmware over 1900 and confirmed once again how careless I can be! Power flipping worked, got Linksys OS back and then installed the correct Gargoyle. Thank you so MUCH for your help and the quick reply. For whoever having reset issue: I realized I have flip the power on the fi...

Hello, I installed gargoyle_1.12.0-mvebu-cortexa9-linksys-wrt1200ac-squashfs-factory.img on Linksys wrt1900ac v1 using the firmare upgrade tool in the manufacturer's OS. Now going to 192.168.1.1 doesn't work. PC is connected with Ethernet cable to the port #1 I've restarted PC and reset the router (...