Gargoyle Forum

Sounds like you're still not quite on the right setting. You have Connect Via set to Disabled? Then you use one of the LAN ports as your input, and the rest of your LAN ports as outputs. You can then set the IP of the router normally in the GUI, which is what the router will ask the DHCP server for....

It was a bad idea. / overlay can be taken to USB. OpenWrt does not have this problem. If necessary you can disable the installation of plug-ins on the official releases available on http://www.gargoyle-router.com/download.php How do you intend to do that without USB support? Your router doesn't get...

@All, Installing plugins has been disabled on 4MB routers due to the high probability that doing so will cause the router to cease functioning. This is achieved by purging the opkg records, and hence it does not think you have libc installed. Without libc "installed", you cannot install an...

As a sanity check, can you also try a different channel? There may be interference on 11 other than wifi.

Also does this issue occur to all wireless clients?

Can you confirm that your router is actually outputting a 40mhz channel (with a scanner of some kind)?

Are you upgrading over Ethernet?

Please try going to the latest 1.9.X from the Show and Tell sub forum.
Do not preserve settings.

It won't have been changed from the openwrt default.

Try putting them through something like a Whois.

http://whois.domaintools.com

Do you have 802.11n enabled?

It doesn't have a limitation like that. You'd have to check if openwrt has a limitation (it's probably on the wiki). I've seen one as high as 16000.

Gargoyle sets a limit of 8000 but it is changeable.

High res may be useful if you're exporting the data. But I agree that on a small graph it doesn't really add much.