Gargoyle Forum

Try one more thing: 1. ping xxxx.com by WiFi 2. ping xxxx.com by LAN Both IP addresses must match. Is it so? Also be aware of the router's domain name (Can not match your xxxx.com!): https://i.imgur.com/vLfZAye.png Yes, both show WAN IP address, and the Identification page is the same as your pictu...

it seems that the firmware doesn't support NAT loopback fully? This isn't a new issue - see this thread . A workaround for using the DDNS name is to configure it as a local DNS name but exactly how that might be achieved in Gargoyle I don't know. Before I changed to R7800, I had run Gargoyle on tp-...

I have a Weird problem: Setting: Router: R7800 DDNS: xxxx.com port forwarding: 8086 to wired Lan device 192.168.1.103 Test1: firmware 1.11.x ,DHCP to ISP, connecting to xxxx.com:8086 From internet: OK From Wired device inside LAN: NOT WORK From wireless device inside LAN: OK Test2, Stock firmware, ...

I have a Weird problem: Setting: Router: R7800 DDNS: xxxx.com port forwarding: 8086 to wired Lan device 192.168.1.103 Test1: firmware 1.11.x ,DHCP to ISP, connecting to xxxx.com:8086 From internet: OK From Wired device inside LAN: NOT WORK From wireless device inside LAN: OK Test2, Stock firmware, D...

I downloaded the client config zip file from another R7800 also flashed 1.13.x gargoyle and set as openvpn server. BTW, I tried uncompress the zip file, and used "individual configuraton files" option, same error appeared. the zip file seems OK, because I can upload it after flashing the R...

I downloaded the firmware from https://lantisproject.com/gargoyle_custom/ and flashed factory.img into R7800 by tftp. the upload zip file function in openvpn menu doesn't work. it shows up an error message "Could not find config file". about the subnet question, it seems it's my input mist...

there are some bugs on OpenVPN menu: 1. Set as VPN client and select a zip file, after clicking "save changes" an ERROR " Could not find config file" shows up. 2. Set as VPN Server,Client Internal IP set to 10.8.0.2, Subnet IP set to 192.168.1.0/255.255.255.but the config saved i...

The edit button of Dynamic DNS in firmware does work, but in Dynamic DNS plugin, it doesn't work? Test: Buffalo WZR-HP-G300NH, including Dynamic DNS function, can edit. TP-Link TL-WDR4300 v1, dynamic DNS plugin, can't edit. :?: and using the plugin from the ispy package? To install ispy packages yo...

The edit button of Dynamic DNS in firmware does work, but in Dynamic DNS plugin, it doesn't work?
Test:
Buffalo WZR-HP-G300NH, including Dynamic DNS function, can edit.
TP-Link TL-WDR4300 v1, dynamic DNS plugin, can't edit.

yes, it works this time.
thank you!