Gargoyle Forum

So with 1.11 there is no longer plan to support plugins (at least USB printing) without external space ?? They tired real hard to make space but in the end openwrt got to big. You need a router with more RAM and More Flash for the latest version of Gargoyle. If your not concerned about router secur...

How much RAM and Flash does that router have?

yes, but..... your router is not supported.

If your router is really old (version) you might be able to find and old gargoyle firmware?

Old firmware has security issues.......

To be fair I don't like the bridge/repeater mode

It works as expected but if the wireless AP signal is poor (or non existent) I get nothing but problems.

In AP mode you can always connect and configure even if the internet goes down for example.

But it does work....

When I set it to use the repeater function, the ap never comes up and it never connects to the main ap.

Can you show us a screen shot of your configuration

Openwrt has the best information

https://openwrt.org/toh/tp-link/tl-wr1043nd

Trying install openwrt first then install gargoyle

openwrt/gargoyle have the same install procedures

So I tried that configuration and with a cable in from my wired network to the WAN port, I was not able to access the rest of my network. This is the expected behaviour with a firewall. Gargoyle is not designed for advanced networking. If you keep all your devices on the same subnet things work muc...

I'm going to suggest

Bullet M

or

UniFi AC Mesh (not supported by Gargoyle yet)

Both under powered for big loads

gargoyle_1.11.x-ath25-ubnt2-pico2-squashfs-sysupgrade.bin gargoyle_1.11.x-ar71xx-generic-ubnt-nano-m-squashfs-sysupgrade.bin gargoyle_1.11.x-ar71xx-generic-ubnt-air-gateway-squashfs-sysupgrade.bin gargoyle_1.11.x-ar71xx-generic-ubnt-unifi-outdoor-squashfs-factory.bin gargoyle_1.11.x-ar71xx-generic-...