Gargoyle Forum

How could I increase power over 16 - 17dBm for wifi emitter, if it is possible (19 - 20 dBm for example)?

Thank you.

Thank you for your help. I restored it and it work now. I have another one WZR-HP-G300NH running a version of LEDE (17.01.1). Could I flash directly with gargoyle_1.12.0-ar71xx-generic-wzr-hp-g300nh-squashfs-sysupgrade or need to restore factory (.enc file) before? I want to use both with same firmw...

Lantis wrote: ↑

Wed Oct 21, 2020 5:16 am

Have you tried putting it into failsafe mode?
Did you tick "attempt to preserve settings" when upgrading?

Yes, I tick attempt to preserve settings, before click upgrade.
How could I put it in failsafe mode?

1) first try to hold the reset button approx. for 30 seconds - this should clear the setting. 2) you will probably have to flash the complete FLASH memory via tftp (and serial cable) - this usually happens by choosing the wrong * .bin file or switching from "OpenWrt Chaos Calmer" to the &...

Hello. I tried to flash gargoyle_1.12.0-ar71xx-generic-wzr-hp-ag300h-squashfs-sysupgrade over the 1.10.0 version that run on my router. After flash, I can't access the router interface. Diag led blink a time and turn off, Power led light green, no WiFi leds light on. Tried to ping device, respond as...

Could you post the contents of your /etc/dnsmasq.conf file (if it exists) Hello, Yes, it exist, but have nothing than comment lines: # Change the following lines if you want dnsmasq to serve SRV # records. # You may add multiple srv-host lines. # The fields are <name>,<target>,<port>,<priority>,<we...

Thank you for your answer. The problem was solved yesterday. After I config firewall rule using uci/cli like: firewall.@rule[4]=rule firewall.@rule[4].src=lan firewall.@rule[4].dest_port=9100 firewall.@rule[4].proto=tcp firewall.@rule[4].target=ACCEPT firewall.@rule[4].name=Allow Printer I put anoth...

Nobody can help me?

Hello. The english is not my mother language and excuse me for. This is my first post here, it requires support for installing print server in order to use in my home network of DCP1510 Brother printer. My router TP_Link TL-WR1043ND ver 1.10 that I use, has installed firmware OpenWRT 12.09 Attitude ...