Search found 6771 matches
- Thu May 23, 2024 9:30 am
- Forum: Feature Requests
- Topic: Connected hostnames in DHCP mode
- Replies: 5
- Views: 146
Re: Connected hostnames in DHCP mode
Edit /etc/config/dhcp and add a static host entry. You only need to include the name and the IP or MAC that identifies it. Neither of these work with the GUI as we require both IP and MAC, not one or the other. In current versions of Gargoyle only the IP entries will work for what you want to do. It...
- Thu May 23, 2024 6:11 am
- Forum: General Discussion
- Topic: IPV6 over RNDIS
- Replies: 1
- Views: 12
Re: IPV6 over RNDIS
No reason it shouldn’t.
Are you running something newer than 1.12 yet?
If so, please post your /etc/config/network
Are you running something newer than 1.12 yet?
If so, please post your /etc/config/network
- Mon May 20, 2024 6:26 pm
- Forum: Hardware / Installation Issues
- Topic: LinksysWRT1900acs v2 bricked !?
- Replies: 7
- Views: 227
Re: LinksysWRT1900acs v2 bricked !?
It must be 3.3v tx rx. You are correct to not connect power.
Read the wiki, it tells you that they are a 2mm pitch pin. Most cables you can buy are 2.54mm so you will have difficulty attaching the pins. If you can find 2mm is best otherwise you might need to cut/shave to fit.
Read the wiki, it tells you that they are a 2mm pitch pin. Most cables you can buy are 2.54mm so you will have difficulty attaching the pins. If you can find 2mm is best otherwise you might need to cut/shave to fit.
- Mon May 20, 2024 8:14 am
- Forum: Feature Requests
- Topic: Connected hostnames in DHCP mode
- Replies: 5
- Views: 146
Re: Connected hostnames in DHCP mode
How do you want to identify the hosts? Are their IP's stable or do you need to identify them by MAC?
- Sun May 19, 2024 6:17 am
- Forum: Feature Requests
- Topic: Connected hostnames in DHCP mode
- Replies: 5
- Views: 146
Re: Connected hostnames in DHCP mode
You can do this via static leases in the Connection DHCP page. There is no GUI way of doing this without setting a static lease.
- Fri May 17, 2024 10:53 pm
- Forum: Hardware / Installation Issues
- Topic: LinksysWRT1900acs v2 bricked !?
- Replies: 7
- Views: 227
Re: LinksysWRT1900acs v2 bricked !?
Yes, that is highly indicative that your build failed. It is likely you did not have python3 available as python in the PATH or ENV. Those problems are generally limited to the GUI, it would have functioned ok (a few glitches). Please check your build environment has all the prerequisites carefully....
- Fri May 17, 2024 10:03 pm
- Forum: Show / Tell / Contribute
- Topic: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
- Replies: 45
- Views: 23680
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
I'm compiling a new version for you now. I'll post it in a few hourswhataboutnow wrote: ↑Fri May 17, 2024 7:42 amhiya sorry for the delay,
I have a wrt3200acm
Happy to do a couple of hours guinea pig over the weekend.
EDIT: Available here https://lantisproject.com/gargoyle_cust ... lds/mvebu/
- Fri May 17, 2024 7:29 pm
- Forum: Hardware / Installation Issues
- Topic: LinksysWRT1900acs v2 bricked !?
- Replies: 7
- Views: 227
Re: LinksysWRT1900acs v2 bricked !?
You need a 3.3v usb to serial converter. The way to hook it up is described in the link I provided. For software you have hundreds of options. I use Putty. You will need a factory image to flash. I’d suggest googling for others who have done serial recovery of your device for guidance. It is not dif...
- Fri May 17, 2024 9:41 am
- Forum: Hardware / Installation Issues
- Topic: LinksysWRT1900acs v2 bricked !?
- Replies: 7
- Views: 227
Re: LinksysWRT1900acs v2 bricked !?
If you can’t get any successful boot from either partition then you must use a serial interface to debrick. https://openwrt.org/toh/linksys/wrt1900acs#debricking I would be interested to know why you thought 1.15 was “buggy”. There are prebuilt images did you try one of those? Perhaps your build was...
- Mon May 13, 2024 5:36 am
- Forum: Show / Tell / Contribute
- Topic: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
- Replies: 45
- Views: 23680
Re: Gargoyle 1.15.x BETA - 2024-03-11 - Based on OpenWrt 23.05
VLAN required by ISP Happy to see this build being released 🤗 can i just check please - my isp requires that I add a vlan ID to my connection details, is that supported in this build? Many thanks 😊 What device do you have? I finished writing basic WAN side VLAN support last night and need a Guinea ...