Gargoyle Forum

Dewuer I expect your inference is correct in that you cannot save the settings due to a blank field which is checks for.

You can however manually edit the settings files on your router to get you up and running.

You want wireless roaming? Connect lan port of router 1 to WAN of router 2. Set connection type to DHCP wired. Set the router 2 IP address in the same subnet but outside your DHCP pool (or set it static in router 1). Disable DHCP and NAT on router 2. Enable wireless. Set SSID, channel and password t...

My guess would be no. A DMZ is essentially creating a VLAN, with the only rule being to accept all incoming traffic in my experience. This is to avoid port forwarding issues (and makes sense as that is where the dmz setting is found in the gargoyle ui). A dmz at a guess would prevent all the LAN att...

You'll want to setup a VLAN. This isn't supported through the GUI in gargoyle so you'll be running commands and editing config files. This is quite a thorough example that I'm sure you could apply to yourself http://coderazzi.net/howto/openwrt/tl841n/vlans.htm From my personal point of view: They'll...

Recently a lot of people are reporting spooky behaviour like this.
The one thing they all have in common?
4MB of flash.

its not everyone's cup of tea, but you should be looking at the code changes for these updates. tells you everything you need to know. was a simple error that caused the issue. haserl needed the upload limit and directory for the file. That's my understanding. I am early in the learning curve. Wher...

Bookmark this thread friend. If you make any changes that overwrite this config it will probably default back to before so you'll have to do it again.

Place BThub in bridge mode. Connect from BThub to WAN port of WR1043ND

Set xlmnection type to PPPoE in gargoyle. Enter details. Away it goes.

All of this information is covered in the documentation. If you get stuck come back with specific questions and a handful of screenshots.

its not everyone's cup of tea, but you should be looking at the code changes for these updates. tells you everything you need to know. was a simple error that caused the issue.
haserl needed the upload limit and directory for the file. That's my understanding.

edu wrote:Welp, lemme see if I got this right..

Just bought a TL TP-WRD4300, flashed gargoyle 1.7.1 from the oficial release... I can or I cannot sysupgrade to this latest beta version via web interface?

Thanks in advance.

You can.