Gargoyle Forum

Looks like a wifi speed issue then.

Can you post a screenshot of the current wifi setting in Gargoyle eg: mode, channel etc?

Also download the last free version of Inssider (v3.0.x) from here and run a scan when the Gargoyle wifi is running
http://www.metageek.net/support/metagee ... -archives/

Is this copy from a device on LAN port on the TP Link to another device on LAN port on the TP Link or is it to another network connected via WAN port?

Can you post a diagram of your network setup?

Got around to doing this, old WRT54GL running Tomato USB out and TP Link TL-WR1043ND running Gargoyle/OpenWRT back in.. Here's what I did: Assuming you are on Windows PC connected to the router via LAN... 1: Download/Install WinSCP http://winscp.net/eng/index.php 2: Settings for WinSCP: File Protcol...

Assuming you are on Windows PC connected to the router via LAN... 1: Download/Install WinSCP http://winscp.net/eng/index.php 2: Settings for WinSCP: File Protcol: SCP Host Name: IP Address of our router (eg: 192.168.1.1) User Name: root Password: The password you set in Garogyle web admin 3: Once co...

I had problems with SIP based VOIP on 1.5.9.. specifically two calls at once where we have multiple IP handsets registering to external SIP provider. See here: http://www.gargoyle-router.com/phpbb/viewtopic.php?f=6&t=4121 I assume it's still the same in 1.5.10 so you probably need to stop ip_nat...

I have a Linksys WRT54GL running TomatoUSB (Toastman Mod) and a couple of TP link TL-WR1043ND's running Gargoyle Router 1.5.9 Specifically, what are you trying to achieve with QoS and what is the problem currently? The Gargoyle UI for QoS combines % min and max into one page and has decent default r...

Yes I think you're onto something there. I found this NAT Analyzer that uses a Java applet to perform various tests on UDP and NAT and ran it on the devices involved: TP Link TD-8840, my DSL modem I normally use this in PPPoA half bridge/ip extension to my router but I set it back to a normal connec...

Haven't had time to investigate siproxd yet but I put in my spare old Linksys WRT54GL running TomatoUSB and 2 SIP calls at once works perfectly, the problem seems to be an OpenWRT thing.

I'll have another go and getting Gargoyle/OpenWRT to work later.

I'll have a look at siproxd.

Seems strange that 1 call works perfectly for us, it just hates two calls at once. Everything else works great and the QoS is working really well.

Hi guys, As per the subject we have a TP Link TL-WR1043ND running 1.5.9 and use a hosted voip provider and are seeing a problem when we have two calls active at once. One incoming call works fine, if there is a second incoming whilst one call is active it rings the phones as expected but when someon...