Gargoyle Forum

so far 1.3.9 is stable on the linksys

Thanks DoesItMatter!

We've downgrade to 1.3.9 and it's stable so far.

I've used what's recommended on this link from openwrt
http://wiki.openwrt.org/doc/howto/generic.flashing.tftp

I'm using a Mac OS X TFTP Client to load the image.
Did you follow the directions to downgrade properly?
Pls. list your steps and so we can help you out.

Hi gwhm!

We're trying 1.3.9 WRT54G and so far so good.
We'll update later on if any hiccups.
If not we'll downgrade to 1.2.5 and go up.

We had the same issue.
DoesItMatter suggest the following.


Try Gargoyle 1.2.5

Then try 1.3.9

1.3.0 - 1.3.9 are using the Broadcom 2.4 drivers.

1.3.10 and up use the Broadcom 2.6 drivers

See this post:

http://www.gargoyle-router.com/phpbb/vi ... f=3&t=1101

Thanks DoesItMatter!

Also we tried the TP-Link WR1043ND with v. 1.5.8 works well we even put a 128MB of USB ThumbDrive for Linux Swap

So, far it's working well.
We'll report back once we've tested it for 1 week.

ok what we've found out for the past 3 weeks now that 1.4.6 is more stable than 1.5.7 & 1.4.7.. but we're getting a connection timeout so based on the other post in this forum that it stems to the upgraded driver for the broadcom chipset. We did try the fix below but didn't work on us. iw dev wl...

ok we tried the fix and it didn't work.
cannot connect to the internet and wifi for some reason.
we don't know how to revert the changes so we'll re-image to 1.4.6 or 1.3.6 to see if that works for us.

Ok I will try this on the WRT54G v3.0 and see if this works.
We've set set the DHCP Lease Time to 8,760 hours as we thought this will fix it.

iw dev wlan0 set bitrates legacy-2.4 6 9 12 18 24 36 48 54

first if this doesn't work we will try

iw dev wlan0 set bitrates legacy-2.4 1 2 5.5 11

Hi Mix,

Any update to this issue?
We would like to know as this might be the answer tot he connection timeout we're experiencing http://www.gargoyle-router.com/phpbb/vi ... =11&t=3334

Thanks!

Merrill