Gargoyle Forum

Why the firmware for Alix boards is missing??

I'm running version 1.5.5 on an Alix 2D2. My ISP should provide 8mbps download, 1mbps upload.

I don't see that the CPU is saturated during my tests.

I have both download and upload QoS disabled. I perform a speed test on speedtest.net without anything else generating traffic on my network. The download speed is correct (i.e. the same one as when I'm directly connected to my modem). But my upload speed is almost 40% less then when I'm connected d...

Can the AAC system raise the link limit? I see is that ACC reduces the link limit, but it seems to never raise it. The problem with this is that I setup my bandwidth limit to 8000 kbps, but it seems that AAC can adjust the limit to around 4000 kbps... And AAC doesn't try do raise the limit back to 8...

Ok I had time to do more tests, and like pbix suggested, removing the max bandwidth for the class fixed the problem. However, I don't understand why the max bandwidth setting caused a problem. The limit was set to 96kbps. During a call, the load displayed by Gargoyle is 25kbps. So there is still eno...

During my tests, my WAN link was not saturated. I agree that it seems to have no relation between QoS and this problem, but the fact is that I just remove from iptables to rule that mark the VoIP traffic and the problem disappear. Also, I can reproduce in a consistent manner... it's not a problem th...

Since I switched my router to Gargoyle (1.5.5), I have frequent problems with my SIP ATA: it looses its registration with the server. After investigation, I found something interesting: - The ATA device register every 120s. - Registration works when there is no call. - If registration occurs during ...

See http://www.gargoyle-router.com/phpbb/vi ... =10#p13267

It would be nice to have a description field for QoS classification rules, like we have in port forwarding rules.

It would help remember the goal of each rule...

I have an Alix 2D2 board with Gargoyle 1.5.5. I try to restore default config using the web UI and my settings are always kept. I also tried to re-install the image without the "preserve settings" option enabled: no success. So how can I reset to factory the device, without having to re-fl...