Gargoyle Forum

firstboot && reboot
in Putty not working. After Reboot is all the same. I have make Client+Acces Pont, WPA-PSK Password, Login in webinterface without password. No change

I use as you the same configuration: TL-WR1043ND(ip:192.168.2.1) is the first router with Gargoyle 1.5.4 and TL-WR941ND(ip:192.168.1.1) as Gateway(Access Point+Client) is second Router. The antennas must be in the right position. Distance between both router is 15 meter and 4 walls. For me is channe...

I have TL-WR941ND v.3.6, use Firefox 15.1.1 for flashing. First flash with wr941nv3_en_3_13_9_up(120201).bin, then with gargoyle_1.5.4-ar71xx-tl-wr941nd-v3-squashfs-factory.bin and back to stock firmware with wr941nv3_en_3_13_9_up(120201).bin. The last version of Gargoyle 1.5.7 is not good(weak WiFi...

I have buying TL-WR3600 because have 5Ghz. With my older router TL-WR941ND and Gargoyle 1.5.4 work all channels. The speed with my NAS with older router through WiFi was not very quick: 5,2 - 9,8Mbyte(different in different hours) read and 2,5 - 5,7Mbyte write. The new one and 5 Ghz is a bit quickly...

I was very disappointed from the stock firmware and flash it with the last gargoyle version. All working good, but some small bugs: 1. By 2,4 Ghz the channels 12, 13 and 14 are missed 2. Channel 52 by 5 Ghz doesn't work, maybe anothers too, i have only tested channels 36, 44, 52 and 149 3. Restore D...

I find self the solution. Only this and DHCP site for fixed IP address of my NAS are changed: http://i46.tinypic.com/2uhbe9x.jpg Now i can access NAS device in another subnet mask as early with stock firmware. I think, this was the reason: With the stock firmware TP-Link TL-WR941ND send all MAC addr...

I have a problem with two difference builds of Gargoyle: the stable 1.4.7 and the last experimental 1.5.4 I have reset to default configuration, only this site is changed: http://i45.tinypic.com/htb38y.jpg I have NAS device on the one LAN port, and another Access point on another LAN port, from him ...