Gargoyle Forum

I have the same problem: DHCP over Bridge is not working When I'm using a static IP address for the wired PC, the connection to the Internet is working but I'm not able to access my WR1043ND from this PC. However I'm able to access the WR1043ND from a PC connected via WLAN to the Fritzbox. My Setup:...

Hi, I want to use my ZTE UMTS USB Stick with the TL-WR1043N. The 3G (GSM) option is not available in the connection menu. Like said in this manual: http://www.gargoyle-router.com/wiki/doku.php?id=3g I did opkg update opkg install picocom in the console. But when I try picocom -b 115200 /dev/ttyUSB2 ...

Hi, I'm running 1.5.8 on a TP-Link TL-WR1043N. The router is connected by ethernet to an exisiting network and I'm using it as a WLAN AP to connect my clients wirelessly to the internet. This is working as it shold be, but what is not working is wget from the console. If I try wget http://www.google...

It's working, thanks a lot! Just one last question: WLAN clients connected to my main router (running stock firmware) are listed on the bridge router (running Gargoyle) under "Status" - "Connected Hosts" - "Hosts With Active Connections". They are listed without "H...

I want to establish a WLAN Bridge like I sketched it here: http://img252.imageshack.us/img252/8652/wlanbridge.png My research brought me to four different solutions: 1. Routed Client Mode (http://wiki.openwrt.org/doc/howto/clientmode#routed.client.mode) 2. Bridged Client Mode (with relayd) (http://w...