Gargoyle Forum

Thanks, how do i Try to custom compile Gargoyle on the Master branch of OpenWrt?

almost forgot, device info.

http://en.techinfodepot.shoutwiki.com/w ... SAP-1800V2

http://en.techinfodepot.shoutwiki.com/w ... _BSAP-1925

Not sure if it is okay to post this here but here goes. https://github.com/danielg4/openwrt/tree/bsap1920-testing the Adtran BSAP-192x series covers the Adtran BSAP models 1920/25 https://openwrt.org/toh/hwdata/bluesocket/bluesocket_bsap-1800_v2 these are both ath79 targets If this is not the correc...

I do not, teddy_b at tomatousb was working on adding support then one day he just disappeared..

and fyi on the latest release of gargoyle the router will boot as long as you don't clear the nvram, but no networking interfaces are found, if the nvram is cleared then you will get a kernel panic. on a lighter note: I made a really neat serial cable that can use the four serial pins inside the wan...

i ran into the same problem, http://www.gargoyle-router.com/phpbb/viewtopic.php?f=8&t=1902 someone did make a version of tomato that worked sorta but they disappeared from the internet with the source and what they did to make it work.. https://dl.dropbox.com/u/24543022/tomato-K26USB-1.28.9052MI...

yup some point in the earlier gargoyle builds support was broken, now lan and wifi does not even come up, router works fine on official linksys firmware and dd-wrt builds for wrt350n, trying to help the guys at tomato usb mod to add support as well..

tried with ver 1.4.3 and 1.5.0 for wrt350nv1, router boots but does not load any interfaces, I have jtag and serial interface to recover, attached is log output from serial.

http://dl.dropbox.com/u/24543022/wrt350n_serial.log