Gargoyle Forum

Ok, final update. First, entering ":wq" (without the quotes obviously), does write and quit vi. To change the gateway, this is what I did: SSH into gargoyle and log in cd /etc/config vi dhcp I then found the following config 'dhcp' 'lan' option 'interface' 'lan' option 'start' '100' option...

I want to thank you "DoesItMatter" for your help, it is greatly appreciated. As an update, gargoyle appears to work better than any other firmware on this device when functioning as an access point. I highly recommend the use of openwrt/gargoyle for this device over dd-wrt or stock firmware.

Ok, so a bit of an update. I searched through the files and found one called /etc/config/dhcp While this file appears to contain the dhcp range and other dnsmasq options, it does not appear to include the gateway. The file /etc/config/network does not appear to include the dhcp assigned gateway asid...

DD-WRT has an issue propogating dhcp through client/bridge devices. However, a neat side effect of this new config is that using gargoyle as an AP behind my client/bridge device is that I now get dhcp to all my clients that are behind it. While it works, and I get internet (client<-wifi->WZR<-wired-...

Is there any way to configure the DHCP to hand out a different IP as the gateway? I went into dnsmasq.conf using vi from a ssh session but it seems gargoyle does not use this for DHCP as there were no dhcp values. On a side note, how do you quit vi from openwrt? q! doesn't seem to work. My current s...

Ok, so I broke out my old WRT-54GL (not GS) and put that as my internet facing router. So far, I have a relatively stable link between that and my WRT-600N with 5GHz disabled at my desk (+1 for broadcom to broadcom). I also hardwired my NAS back at my desk. I am going to give Gargoyle a try to broad...

I see from your sig that you use several different flavors for your router F/Ws. I also notice you have "Buffalo WZR-HP-G300NH = Gargoyle 1.4.2" in your signature. Is this because you've found this to be the most stable F/W on this device? Are there other flavors that have worked just as w...

While I am capable of performing everything necessary to get vanilla openwrt up and running, it is a bit more time consuming that I prefer. I am looking for more of a turnkey solution. Honestly, if you want the quickest solution to your problem Wire connect the WRT600N to your WZR-HP-G300NH That wi...

Basically I want to know what others experiences with Gargoyle on the WZR-HP-G300NH. The rest of the post gets a bit winded so feel free to just chime in on this part if you wish. Now for the long winded part, I have a rather complex network setup and have been a long time user of DD-WRT. I have, ho...