Gargoyle Forum

I can confirm the same behaviour. Quick question. I've set up a wireless bridge properly, clients can access the internet with no problem, but when i'm connected through the repeater (wireless/ethernet), i can't access/ping the GUI using the Relay IP. But if i'm connected to the main router, i can a...

You were right. It's where it should be this morning. The 1.9x install looks great on my phone screen.

Thanks for the assistance.

OK, so that config is in and working but how do I set the Relay IP address to be what I want it to be? I've used the primary routers static dhcp facility to assign an ip address of 192.168.0.103 to the bridge via the mac address seen by the primary router, rebooted the bridge, but the relay ip addre...

ispyisail wrote:If you want to get into the tech side google "Openwrt wiki relayd"

OK thanks. I need to play some.

Yep, right there In the help text: “Bridge IP must be outside AP subnet” Try reading this https://www.gargoyle-router.com/wiki/doku.php?id=bridge_repeater Each of your bridges will need to be on a different subnet for bridge IP, and their Relay IP (and more importantly, clients) will end up on the ...

OK, here's a screen shot

https://www.dropbox.com/s/kp0j26bgo55gk ... e.JPG?dl=0

I tried to upload a screenshot of the config page. The forum reports the board is over its allocation for attachments... How do I get around this?

I just noticed on the 1.9x router that the router status report shows "Bridge IP address 192.168.0.103" and "Relay IP address 192.168.0.154"

I cannot access it on 103, but have to access it on 154...

I have several TP-link routers: TL-WR1043 on 1.91 Wireless bridge 192.168.0.101 TL-WR1043 on 1.8 Access point 192.168.0.110 TL-WDR-3600 on 1.9x Wireless bridge 192.168.0.103 TL-WDRT-4300 on 1.91 Wireless bridge 192.168.0.102 The network router is set to serve up ip addresses in the range 192.168.0.2...

OK, so you would recommend upgrading to 1.9x from the show / tell forum?

ispyisail wrote:1.9.1 wasn't a very good version

1.9.2 is much better that 1.8.1

1.9.x is the most stable of all