Gargoyle Forum

Happy to say it looks like it worked! Maybe I wasn't patient enough and didn't wait long enough for the web config firmware update. Good to know that fon-flash works for me

loading file:
load -r -b 0x80100000 -m tftp file_2

creating flash partition (this may take some time)
fis create -f 0xa86f0000 -l 0x000e0000 -e 0x80041000 -r 0x80041000 vmlinux.bin.l7

Setting boot_script_data...
fis load -l vmlinux.bin.l7
exec

Done. Restarting device...

that 'Your mac' section has a funny address....

Peer MAC: 00:18:84:81:07:e8 Peer IP : 192.168.1.1 Your MAC: 00:ba:be:ca:ff:ee Your IP : 192.168.1.0 Setting IP address... ip_addr -l 192.168.1.1/8 -h 192.168.1.0 Initializing partitions ... fis init loading file: load -r -b 0x80100000 -m tftp file_1 creating flash partition (this may take some time)...

trying fon-flash now.... ^C[discord@coffee fon-flash-src]$ sudo ./fon-flash -i eth0 -c gargoyle ../garyle/gargoyle_1.5.9-atheros-root.squashfs ../gargoyle/gargoyle_1.5.9-atheros-vmlinux.lzma Reading image file ../gargoyle/gargoyle_1.5.9-atheros-root.squashfs with 2490368 bytes, rounded to 0x00260000...

Ok, I read in the gargoyle webconfig to use the combined img file. So I tried it. It didn't go as expected... Not sure what is going on here, do I have to disable my wireless network interface, which is on a different subnet, when flashing the routers? e.g. wlan0 is 192.168.0.X eth 0 is 192.168.1.X ...

found this somewhere, looks like root.squashfs

Model RAM Flash USB Firmware File(s)
La Fonera v2100-2200 16MB 8MB No *-root.squashfs, *-vmlinux.lzma

Here is a list of choices: gargoyle_1.5.9-atheros-combined.squashfs.img 74db4a1c0fa506ed79d5115461492eae gargoyle_1.5.9-atheros-root.squashfs d6df73f9fb7ef954ab2ea2dd58a3d431 gargoyle_1.5.9-atheros-vmlinux.lzma 0e3e80a609505824c5279ce25fb62d79 gargoyle_1.5.9-atheros-vmlinux.gz 1638abca5098ffed08d1d7...

Using this http://www.dd-wrt.com/wiki/index.php/Recover_from_a_Bad_Flash as a source: The power LED flashes very fast. If it keeps on flashing longer than 2 minutes, without having lit up the other LED's, then a defective bootloader is present. However, if you can ping 192.168.1.1 (your router IP) y...

running 1.2.5 and I wanna upgrade to 1.5.9 . Sorry I am having trouble choosing which firmware image do I select? Any caveats?