Gargoyle Forum

Here is what I see, and the first two lines are trying to tell me something, as if it thinks I don't have an R6220. Are there different versions of that hardware? Valid firmware:No Firmware matches device:No Supported devices:netgear,r6220 r6220 Firmware/Device Compatibile:No. Config cannot be migra...

No, I stopped when I got the warning and I didn't click Preserve Settings. I read that Netgear sets the partition we need at 18MB, not very big. But that's interesting you had success.

Back in 2022 I flashed gargoyle_1.13.0-ramips-mt7621-r6220-squashfs-factory.bin onto my two Netgear AC1200s, working great. Recently I went to upgrade one using gargoyle_1.14.0-ramips-mt7621-netgear_r6220-squashfs-sysupgrade.bin, but no joy. I get the error message "Firmware has been detected a...

I saw a few posts on the issue where DDNS updates your provider with a non-routable address such as 10.20.10.22, but I didn't see an obvious solution. Did I miss it? This is happening every two hours on all of my routers running the release code against no-ip.com

My WRT32X router with 1.12 uses either wired or PPPoE connections to my NBN HFC modem. Every 5 days or so I find that the WAN download speed has dropped by 5-10%. If I reboot or reestablish the WAN connection it goes back to full speed. This might be due to my QoS settings, the NBN network provider ...

Great answer, kicking myself about the Delete button, although if data has been collecting for months you have to scroll down a *very* long way to see the magic Delete button I never noticed. Have a great weekend, what's left of it.

No problem. Please recommend the best procedure to start over. I have a feeling that Restore Default Configuration isn't enough to wipe out the historical data.

I might have messed up the monitoring data when I flipped between 1.12 and 1.11 a couple of times this month (I restored a bad config, had to firstboot) I don't need to fix this month's data, but what's the right way to fix the monitoring data from today onwards? Ideally I would like to retain data ...

Sorry for the holiday delay. That was it, not sure how the upload/download QoS boxes got ticked, but it's all better now. Thanks!

First post, long time user. My TP-Link Archer C7 v2 with 1.12.0 shows 100Mbps to fast . com. Wanting better wireless, I swapped it for a much newer Linksys WRT32X with 1.12.0 and the same config, but get less than 10Mbps. Am using a brand new Cat6 cable, the cable modem Phy LED is the same color wit...