Gargoyle Forum

Ok, i've got 1 cam it's time syncronized to my nas. I forced time sync in surveillance station with the onvif protocol. I tried that before, but it didn't work because the ntp server is open on NAS utp port 1 (that's the ip adress i use for ntp in my local lan), and blocked on NAS utp port 2 :D So s...

If the cameras are using pihole for DNS to whatever NTP server they want to use, couldn't pihole be used to redirect those requests to your internal NTP server rather than the firewall level redirection? I was looking into this, but, the camera's use a whole list of ntp servers. Some windows server...

Well i tried for hours, and i can't get it to work, this is the latest entry i did config redirect 'ntp_123' option src 'lan' option proto 'tcp' option src_dport '123' option dest_port '123' option dest 'lan' option dest_ip 'ip-nas' option target 'DNAT' config redirect 'ntp_123' option src 'lan' opt...

I think i have created myself a little problem here, Since i broadcast pi-hole as the only dns server on my lan which i configured in /etc/dnsmasq.conf > dhcp-option=6,"pi-hole ip adress" All dns (ntp) requests on my lan are ofcourse handled by pi-hole. So since the router doesn't get or h...

Thank you so much, yes this works. Got correct time now on both my new cams :) :) But i guess this redirects all outgoing ntp requests to my nas right? Is there a way to only redirect specific ip's? If i read thruw the lines, there is the "option dest_ip" for my nas ntp server. Can i also ...

Hi, Is there a way in gargoyle to redirect outgoing WAN ntp requests on port 123 to my own ntp server in my own lan? I have 2 new ip camera's hooked up to my NAS. But, these cam's are the first where i can't set a custom ntp server url (NAS acts also as ntp server) , i checked pi-hole and these ip c...

No, didn't perserve settings, upgraded the c7 from 1.10, to 1.12 to 1.14 without preserving settings. Also did a "reset to default" before giving this router his new life.

My c7 v2 was originally a c5 v1.2 flashed to a c7 v2. (internal the c5 v1.2 and the c7 v2 share the same hardware)

Good idea, will try the 1.15, can also test the 1.13.

Hi, I flashed my good old archer c7 with gargoyle 1.14. I need to clone the wan mac adres so i can use this router as a gateway on public wifi networks. (i connect with my phone to public wifi, login on the public wifi portal so i have internet, disconnect the phone and then let the router connect t...

Thanks, for now i have a very stable working network and i finally can use the full bandwidth over wan!

I guess injecting the non ct drivers is a new project for when i have spare time again! Thanks everyone for helping me out!