Gargoyle Forum

10 days fought with D-link DAP-1350. To return him to his native firmware - it is very subtle. I did. On the native firmware, the printer can be used only through the SharePort program. D-link must be in AP mode. LAN is connected to the port of the main router. Then through the main router computers...

If all else fails The DAP-1350 has a special D-Link firmware mode that runs a HTTP server on 192.168.0.50 for uploading new firmware. If you get locked out and/or brick your device, you can get into this mode by holding down the reset button for 30-45 seconds while booting the device. Note that the...

Installed OpenWrt. Installed the p910nd Print Server as described on the link https://openwrt.org/docs/guide-user/ser ... nterserver does Not print. In OpenWrt it is not visible at all that is connected to USB. I'm upset.

The next move is to install Openwrt Next problem. After installing Gargoyle on D-link DAP-1350, I can't change the firmware to either Openwrt or the factory D-link. Stitching as usual. The LAN LED on the router blinks for 1-2 seconds and lights up constantly. Nothing's happening. I go in the IP: 19...

ispyisail wrote: i'll get my printer out and confirm if it works with better hardware

Thanks. Can the problem with Canon LBP2900? I heard that the Linux developers refused to support this printer because of the closed exchange Protocol. The information is not accurate. Just a rumor.

ispyisail wrote:Older and slower routers like yours are stating to become unstable

For new firmwares-maybe. Can you recommend the old firmware? To implement a print server? Or still in the trash can?

I want to get this structure of the home network. Specially drawn for dialogue with you.

ispyisail wrote:Is this your router?

https://openwrt.org/toh/hwdata/d-link/d-link_dap1350

Yes. I just need to make it a print server.

ispyisail wrote:Is your router in this list?

My DAP-1350 router is not on this list.

ispyisail wrote:Can you ping the gargoyle router

https://imgur.com/uzTDEtS