Search found 16 matches

by Blebekblebek
Thu Feb 18, 2021 10:05 am
Forum: Network / Wireless Issues
Topic: WRT160NL, MAC Address always changing after reboot.
Replies: 0
Views: 317

WRT160NL, MAC Address always changing after reboot.

I've finally get gargoyle working with this unit. But after rebooting the mac address always change, not just lan, but everything, wan, lan, wifi, everything changed after reboot. I thought the unit is defective, I tried to flash back to original firmware and it showing mac address just fine and nev...
by Blebekblebek
Wed Feb 03, 2021 6:56 am
Forum: General Discussion
Topic: TP-LINK WA860RE-V6 and Archer C50-V4 support?
Replies: 1
Views: 243

Re: TP-LINK WA860RE-V6 and Archer C50-V4 support?

WR860 only have 4MB Flash, not going to happen.
as for C50, there is beta https://dl.eko.one.pl/gargoyle-pl/1.13/ ... ps/mt76x8/

I've tried the beta, it's a mess.
by Blebekblebek
Tue Jan 26, 2021 1:59 am
Forum: General Discussion
Topic: LAN Port Indicator, is it removed or moved somewhere else?
Replies: 8
Views: 472

Re: LAN Port Indicator, is it removed or moved somewhere else?

MT300nv2 { "model": { "id": "gl-mt300n-v2", "name": "GL-MT300N-V2" }, "led": { "wifi_led": { "name": "wifi", "sysfs": "gl-mt300n-v2:red:wlan", "type": "netdev", "device": "wlan0", "mode": "link tx rx" }, "wan": { "name": "wan", "sysfs": "gl-mt300n-v2:green:wan", "trigger": "switch0", "type": "switch...
by Blebekblebek
Tue Jan 26, 2021 1:40 am
Forum: General Discussion
Topic: LAN Port Indicator, is it removed or moved somewhere else?
Replies: 8
Views: 472

Re: LAN Port Indicator, is it removed or moved somewhere else?

CPE210v1 { "model": { "id": "cpe210", "name": "TP-Link CPE210 v1.1" }, "rssimon": { "wlan0": { "refresh": 200000, "threshold": 1 } }, "led": { "rssilow": { "name": "", "sysfs": "tp-link:green:link1", "type": "rssi", "iface": "wlan0", "minq": "1", "maxq": "100", "offset": "0", "factor": "13" }, "rssi...
by Blebekblebek
Tue Jan 26, 2021 12:48 am
Forum: General Discussion
Topic: LAN Port Indicator, is it removed or moved somewhere else?
Replies: 8
Views: 472

Re: LAN Port Indicator, is it removed or moved somewhere else?

I've changed it, and copied the whole text, but it doesn't seems working, maybe because it's 2 lan port units?
Even with 1.10 it doesn't show up either, it's because the PL version?
by Blebekblebek
Mon Jan 25, 2021 10:52 pm
Forum: General Discussion
Topic: LAN Port Indicator, is it removed or moved somewhere else?
Replies: 8
Views: 472

Re: LAN Port Indicator, is it removed or moved somewhere else?

okay, unfortunately my units isn't officially supported, I'm currently using CPE210 & MT300NV2 which both provided by https://dl.eko.one.pl/gargoyle-pl/openw ... ps/mt76x8/

Is there any plan to support these devices officially?
I'll try fix immediately, thank you very much.
by Blebekblebek
Mon Jan 25, 2021 8:58 am
Forum: General Discussion
Topic: LAN Port Indicator, is it removed or moved somewhere else?
Replies: 8
Views: 472

LAN Port Indicator, is it removed or moved somewhere else?

I've been using 1.12 version for some quite time, and my only grip with it is the lack of lan port indicator unlike the older version. Old version: https://www.gargoyle-router.com/wiki/lib/exe/detail.php?id=screenshots&media=screenshots:01_overview.jpg New version: https://i.imgur.com/dK5aNm6.png I ...
by Blebekblebek
Mon Jan 18, 2021 12:02 am
Forum: General Discussion
Topic: Which Firmware for GL.inet MT300N V2?
Replies: 4
Views: 420

Re: Which Firmware for GL.inet MT300N V2?

I have that router as a back up. You can flash Polish Gargoyle on it. On first run, it'll give you the option to use English. If you want stable 1.12: https://dl.eko.one.pl/gargoyle-pl/openwrt-18.06/targets/ramips/mt76x8/ If you want to try out beta 1.13: https://dl.eko.one.pl/gargoyle-pl/openwrt-1...
by Blebekblebek
Sun Jan 17, 2021 3:04 am
Forum: General Discussion
Topic: Which Firmware for GL.inet MT300N V2?
Replies: 4
Views: 420

Which Firmware for GL.inet MT300N V2?

Continuing the saga of my previously bricked router, I've decided to buy and this time a brand new router, I've look around for most reasonably(as in cheapest) price for it, it doesn't need to have wireless, but unfortunately the better the cpu, it also have very high bandwidth wireless (Dual band, ...
by Blebekblebek
Fri Jan 15, 2021 3:50 am
Forum: Hardware / Installation Issues
Topic: Bricked WR1043ND v1, and the reset button won't work.
Replies: 5
Views: 416

Re: Bricked WR1043ND v1, and the reset button won't work.

No sys led, just power and lan indicator if it's plugged in, wan doesn't work either. I don't have serial TTL cable, and ordering it online going to take 3-4weeks, It's kinda mess atm in this town, airport is closing, flood is everywhere since heavy rain pouring down for almost a full week day and n...