<alertbox> WARNING: This document may contain errors which may result in damage to your router. USE AT YOUR OWN RISK. </alertbox> inlinetoc_2_4

In response to the outstanding demand for our initial RouterStation OEM platform, Ubiquiti Networks announces the RouterStation Pro

• Item802.3af 48V compatible
• ItemGigabit Ethernet Switch (4 ports)
• Item128MB RAM
• Item16MB Flash
• ItemUSB 2.0 Support
• ItemSDIO Support
• Item680MHz CPU (Option to overclock to 800)
• ItemRobust ESD/Surge Protection for Industrial Applications
• ItemSupport for 3 Ubiquiti SR,XR,or SR71 radios
• ItemBuilt in dB9 connector
• ItemEasy Access to full GPIO signals

• Ubnt Router with power supply
• Windows PC with NIC card
• Ethernet cable for connection between PC and Ubiquiti router
• Network settings of PC: 192.168.1.1/255.255.255.0
• Install TFTP client on PC
• Gargoyle Firmware

gargoyle_1.5.8-ar71xx-generic-ubnt-rspro-squashfs-factory.bin

• Power off the router
• Press the router reset switch then apply power
• Release the reset button after a few seconds
• LED's should be flashing to indicate recovery mode
• with PC set a fixed IP address 192.168.1.1/255.255.255.0
• Assuming POE, connect Ethernet cable between router “power supply” and “PC”