ubiquiti_routerstation_pro
This is an old revision of the document!
Ubiquiti Routerstation Pro
<alertbox> WARNING: This document may contain errors which may result in damage to your router. USE AT YOUR OWN RISK. </alertbox> inlinetoc_2_4
Introducing RouterStation Pro
In response to the outstanding demand for our initial RouterStation OEM platform, Ubiquiti Networks announces the RouterStation Pro
Features
- Item802.3af 48V compatible
- ItemGigabit Ethernet Switch (4 ports)
- Item128MB RAM
- Item16MB Flash
- ItemUSB 2.0 Support
- ItemSDIO Support
- Item680MHz CPU (Option to overclock to 800)
- ItemRobust ESD/Surge Protection for Industrial Applications
- ItemSupport for 3 Ubiquiti SR,XR,or SR71 radios
- ItemBuilt in dB9 connector
- ItemEasy Access to full GPIO signals
Installing Firmware
Ubiquiti firmware recovery method
Requirements
- Ethernet cable for connection between PC and Ubiquiti router
- Network settings of PC: 192.168.1.1/255.255.255.0
- Install TFTP client on PC
- Firmware file
ubiquiti_routerstation_pro.1354687341.txt.gz · Last modified: 2012/12/05 06:02 by ispyisail
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
