This is an old revision of the document!
TP-Link Routers
<alertbox> WARNING: This document may contain errors which may result in damage to your router. USE AT YOUR OWN RISK. </alertbox>
Introduction
The TP-Link TL-WR1043ND is becoming a very popular Gargoyle router due price and hardware feature set. There are many ways of flashing this device but the easiest method is using “Firmware upgrade” tool.
Download firmware
Go to the Download page and select
Download: Firmware images
Architecture: Atheros AR71XX
Branch: 1.6 (stable)
Version: 1.6.2
To replace the original TP-LINK firmware select the factory.bin download.
TP-WR1043ND-V1.X gargoyle_1.6.2-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin |  |
TP-WR1043ND-V2.X gargoyle_1.6.2-ar71xx-tl-wr1043nd-v2-squashfs-factory.bin |  |
TP-WDR3600-V1.X gargoyle_1.6.2-ar71xx-tl-wdr3600-v1-squashfs-factory.bin | |
To upgrade Gargoyle or OpenWRT firmware select the sysupgrade.bin download.
Install
Open the original TP-Link configuration.
Select “System Tools” » “Firmware Upgrade”
Select
gargoyle_1.3.14-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin
file then click “upgrade”
If you get the error message please choose a file to upgrade, it's because the firmware filename is too long. Rename the firemware filename to gargoyle.bin and upload it again.
 |  |
 |
|
Wait about 5 minutes then you should be able to connect to 192.168.1.1
Do not unplug the power supply during upgrade.
If after 5 minutes 192.168.1.1 is unresponsive first reboot your PC and try again. If after 20 minutes 192.168.1.1 is unresponsive you may reboot both PC and router.
Revert Back Original Firmware
The hardest part to reverting back to the original firmware is finding a suitable file. You can not use the firmware from TP-Link without a file modification.
Luckily somebody has done the work for us
wr1043nv1_en_3_9_17-sysupgrade.zip
