User Tools

Site Tools


scenario-modem

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
scenario-modem [2015/05/04 08:25]
nworbnhoj [Reconfigure existing Modem/Router] formatting
scenario-modem [2015/05/04 14:05] (current)
nworbnhoj [Reconfigure existing Modem/Router] simplify
Line 10: Line 10:
 ==== Approach ==== ==== Approach ====
  
-Going forward, the most simple setup will see the Gargoyle router doing pretty much everything and the existing ISP supplied Router/Modem demoted to simple modem duties.+Going forward, the most simple set-up will see the Gargoyle router doing pretty much everythingand the existing ISP supplied Router/Modem demoted to simple modem duties. 
 + 
 +If the modem can be "bridged" (see below) then Gargoyle can do the whole job. If not, then the existing ISP supplied Router/Modem will still handle the ISP connection, and Gargoyle will cover the rest (firewall, DHCP, wifi, quotas, QoS, etc etc). In this case you need to create **two** network segments. 
 + 
 +The **first network segment** comprises the Modem LAN port, a physical cable, and the Gargoyle WAN port. That's it! All devices on this segment will have static IP addresses like 192.168.**0**.XXX (ie ModemLAN=192.168.**0**.1 and GargoyleWAN=192.168.**0**.2). If you need to access the Modem settings, then you can physically connect a Modem LAN port to a PC with static IP = 192.168.**0**.3 
 + 
 +The **second network segment** will comprise the Gargoyle LAN ports (and wifi) and all of your other devices. All devices on this segment will have IP addresses like 192.168.**1**.XXX (ie GargoyleLAN=192.168.**1**.1) assigned by DHCP.  
 + 
  
 ==== Prepare a Gargoyle Router ==== ==== Prepare a Gargoyle Router ====
Line 23: Line 31:
 If you are configuring an __ADSL__ modem then it is preferable (if possible) to put the modem in**to bridge** mode; which in effect, will connect Gargoyle directly to your ISP. If you are configuring an __ADSL__ modem then it is preferable (if possible) to put the modem in**to bridge** mode; which in effect, will connect Gargoyle directly to your ISP.
  
-Otherwise, if you can**not bridge**, then set the Modem LAN IP Address to **192.168.0.1** to form one node on a very simple network segment just between the Modem and the Gargoyle router (see below). Another network segment will connect all of your devices with IP addresses like 192.168.1.XXX+Otherwise, if you can**not bridge**, then set the Modem LAN IP Address to **192.168.0.1** to form one node on a very simple network segment just between the Modem and the Gargoyle router (see below).
  
  
scenario-modem.1430727930.txt.gz · Last modified: 2015/05/04 08:25 by nworbnhoj