Gargoyle Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Remote Syslog ======

  
===== Introduction =====
Setting up up syslog remote logging server is good for fault finding. 

When logging connect your gargoyle router to the logging server with an Ethernet cable for more reliable results

===== Client =====
Setup your gargoyle router as a syslog client by making a SSH connection to the router and then run the following commands.

NOTE: Change the IP address to your **syslog server**
==== Set IP server address ====

<shell>
    uci set system.@system[0].log_ip=192.168.254.1
    uci commit
    reboot
</shell>

If the setting are "log_ip" then all syslog messages get sent to that IP address (where a syslog server should be running).

==== Increase logging Level ====
Increase the type of message which are sent to the syslog server

<shell>
uci set system.@system[0].cronloglevel=7
uci commit
reboot
</shell>

This will make it show everything except debugging messages.

===== Server =====

==== OS X ====

For Mavericks 10.9, and probably earlier:

You need to edit /System/Library/LaunchDaemons/com.apple.syslogd.plist

Look for the Sockets key and add a new section for NetworkListener:

<code>
  <key>Sockets</key>
  <dict>
    […]
    <key>NetworkListener</key>
    <dict>
      <key>SockServiceName</key>
      <string>syslog</string>
      <key>SockType</key>
      <string>dgram</string>
    </dict>
  </dict>
</code>

The easiest way to do this without running afoul of cached preferences is:

<code>
cd /System/Library/LaunchDaemons
sudo /usr/libexec/PlistBuddy -c "add :Sockets:NetworkListener dict" com.apple.syslogd.plist
sudo /usr/libexec/PlistBuddy -c "add :Sockets:NetworkListener:SockServiceName string syslog" com.apple.syslogd.plist
sudo /usr/libexec/PlistBuddy -c "add :Sockets:NetworkListener:SockType string dgram" com.apple.syslogd.plist
sudo launchctl unload com.apple.syslogd.plist
sudo launchctl load com.apple.syslogd.plist
</code>

Thanks http://stackoverflow.com/questions/5510563/how-to-start-syslogd-server-on-mac-to-accept-remote-logging-messages

==== Windows ====

Windows logging server
http://www.kiwisyslog.com/

Free Kiwi Syslog Server (download the free version with limited features)

Download and install 

Under Setting>>Input change to the IP address to your gargoyle router

{{::2013-09-22_10_17_33-veriton_-_remote_desktop.jpg?500|}} 

{{:kiwi_syslog_server_version_9.png|}}
Gargoyle Wiki

User Tools

Site Tools

Page Tools
