Gargoyle Wiki

User Tools

Site Tools

Trace:
asus_wl500g_premium

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
asus_wl500g_premium [2012/02/11 09:33]
ispyisail 		asus_wl500g_premium [2012/02/18 22:36]
ispyisail
Line 2: Line 2:
  
 =====Asus WL500G Premium (V1 & V2)===== =====Asus WL500G Premium (V1 & V2)=====
 +{{INLINETOC 2 4 }} 
  
 <alertbox> <alertbox>
 WARNING: This document may contain errors which may result in damage to your router. USE AT YOUR OWN RISK. WARNING: This document may contain errors which may result in damage to your router. USE AT YOUR OWN RISK.
 </alertbox> </alertbox>
 +==== Introduction ====
  
 The Asus WL500G Premium is another router that uses a broadcom wireless chip and is very much like the LinksysWRT54G* routers. You will want to use the generic .trx image for this router. The best way to upload it is using the upgrade utility for Windows that ships with the router. Unfortunately, the upgrade utility on the web interface that ships with this router is incompatible with existing third-party firmware. The Asus WL500G Premium is another router that uses a broadcom wireless chip and is very much like the LinksysWRT54G* routers. You will want to use the generic .trx image for this router. The best way to upload it is using the upgrade utility for Windows that ships with the router. Unfortunately, the upgrade utility on the web interface that ships with this router is incompatible with existing third-party firmware.
 +==== Install Firmware ====
 +=== Primary Install  Method ===
 + 
  
 Before installing on this router you need to put it in 'diag' mode. To do this, follow the following steps: Before installing on this router you need to put it in 'diag' mode. To do this, follow the following steps:
Line 18: Line 23:
  
 Once you are in diag mode you can use the windows utility to upgrade the firmware. Once you are in diag mode you can use the windows utility to upgrade the firmware.
 +=== Secondary Install Method ===
  
 Alternatively, you can connect to the router via tftp when it is in diag mode.  Follow [[http://oldwiki.openwrt.org/OpenWrtDocs(2f)Installing(2f)TFTP.html|these instructions]] to transfer and install the image via tftp. Alternatively, you can connect to the router via tftp when it is in diag mode.  Follow [[http://oldwiki.openwrt.org/OpenWrtDocs(2f)Installing(2f)TFTP.html|these instructions]] to transfer and install the image via tftp.
 +==== 3rd party firmware ====
  
 Like the broadcom-based Linksys routers, if you already have other 3rd party firmware such as Tomato or DD-WRT installed, you can upgrade directly from there using the generic broadcom .trx file. Like the broadcom-based Linksys routers, if you already have other 3rd party firmware such as Tomato or DD-WRT installed, you can upgrade directly from there using the generic broadcom .trx file.
  
  
asus_wl500g_premium.txt ยท Last modified: 2012/02/18 22:43 by ispyisail

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki