Differences

This shows you the differences between two versions of the page.

--- tp-link_tl-wr1043nd [2015/04/23 00:21]
nworbnhoj [Install] update firmware versions and tidy up
+++ tp-link_tl-wr1043nd [2015/04/26 23:59] (current)
nworbnhoj old revision restored (2014/02/16 00:50)
@@ Line 1: / Line 1: @@
-====== TP-Link Routers ======
+====== TP-Link TL-WR1043ND ======
 <alertbox>
 WARNING: This document may contain errors which may result in damage to your router. USE AT YOUR OWN RISK.
 </alertbox>
+{{INLINETOC 2 4 }}
 ===== Introduction =====
-The easiest method to flash TP-Link routers is with the "Firmware upgrade" tool in the original TP-Link firmware (or within Gargoyle to upgrade). Alternate methods can be found at [[http://http://wiki.openwrt.org/toh/tp-link/start|OpenWRT]]
-If you do run into trouble then ask a question at the [[http://www.gargoyle-router.com/phpbb/index.php | forum]] or read [[failsafe_mode_recovery]]
-The TP-Link TL-WR1043ND is a very popular Gargoyle router due price and hardware feature set.
-===== Download firmware =====
-Go to the [[http://www.gargoyle-router.com/download.php | Download page]] and select\\
+The TP-Link TL-WR1043ND is becoming a very popular Gargoyle router due price and hardware feature set. There are many ways of [[http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd?s[]=tl&s[]=wr1043nd|flashing]] this device but the easiest method is using "Firmware upgrade" tool.
-**Download:** Firmware images\\
-**Architecture:** Atheros AR71XX\\
-**Branch:** 1.6 (stable)\\
-**Version:** 1.6.2\\
-:!: To __replace__ the original TP-LINK firmware select the **factory.bin** download.\\
+//Note: Firmware is still listed as experimental and not all features may work as expected.//
+{{ tplink-wr1043nd.jpg }}
-|**TP-WR1043ND-V1.X**  \\ \\ ''gargoyle_1.6.2-ar71xx-tl-**wr1043nd-v1**-squashfs-**factory**.bin''\\ \\ [[http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd?s[]=tl&s[]=wr1043nd|OpenWRT]] | {{ tplink-wr1043nd.jpg?150x120 }}|
+===== Download firmware =====
-|**TP-WR1043ND-V2.X**  \\ \\ ''gargoyle_1.6.2-ar71xx-tl-**wr1043nd-v2**-squashfs-**factory**.bin''\\ \\ [[http://wiki.openwrt.org/toh/tp-link/tl-wr1043nd?s[]=tl&s[]=wr1043nd|OpenWRT]] | {{ tp-wr1043-v2.jpg?150x120 }}|
+Select the correct firmware for this device.
-|**TP-WDR3600-V1.X**  \\ \\ ''gargoyle_1.6.2-ar71xx-tl-**wdr3600-v1**-squashfs-**factory**.bin''\\ \\ [[http://wiki.openwrt.org/toh/tp-link/tl-wdr3600?s[]=tl&s[]=wdr3600|OpenWRT]] | {{ tp-wr1043-v2.jpg?150x120 }}|
-:!: To __upgrade__ Gargoyle or OpenWRT firmware select the **sysupgrade.bin** download.
+{{:select.jpg|}}
+Upgrading existing router (Gargoyle or OpenWRT) firmware
+''gargoyle_1.3.14-ar71xx-tl-wr1043nd-v1-squashfs-sysupgrade.bin''
+Installing new firmware
+''gargoyle_1.3.14-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin''
 ===== Install =====
 Open the original TP-Link configuration.
-**Select** //System Tools - Firmware Upgrade//\\
+Select "System Tools" >> "Firmware Upgrade"
-**Select** //gargoyle_1.6.2-ar71xx-tl-XXXXXXXXX-squashfs-factory.bin//\\
-**Click** //upgrade//
+Select
+''gargoyle_1.3.14-ar71xx-tl-wr1043nd-v1-squashfs-factory.bin''
+file then click "upgrade"
-:!: If you get the error message "please choose a file to upgrade", then rename the firmware filename to something shorter (i.e. "gargoyle.bin") and upload it again.
+If you get the error message ''please choose a file to upgrade'', it's because the firmware filename is too long. Rename the firemware filename to ''gargoyle.bin'' and upload it again.
 |{{:logo1.jpg|}}|{{:logo3.jpg|}}|

Gargoyle Wiki

User Tools

Site Tools

Differences

Page Tools