Differences

This shows you the differences between two versions of the page.

--- qos [2015/08/13 16:51]
pbix [Total Bandwidth Field]
+++ qos [2017/12/29 01:21] (current)
ispyisail [Router Performance]
@@ Line 218: / Line 218: @@
 On the download page the value you enter depends on if you are using ACC or not.  When using ACC you enter the maximum download speed you saw.  If you enter a value even 10% higher its OK too.  ACC is going to automatically adjust the actual speed QoS between 12% of this number and 100% of this number.  If you enter a number too high (say 2x your link speed) then you just lost some range because ACC will only adjust between 12% and 50% (all the numbers between 50% and 100% are too high) but it will still basically work.
-If you are not using ACC then things get more complicated.  You need to enter the minimum value of your downlink speed.  Since downlink speeds can vary significantly in time, 20%-80% is not unusual, so this can be an impossible task.  If the downlink speed is set too high your QoS will simply not work.  If set to low you will under utilize your link and feel cheated.  For this reason I recommend that you use the ACC if you want your QoS to work.
+If you are not using ACC then things get more complicated.  You need to enter the minimum value of your downlink speed.  Since downlink speeds can vary significantly in time, 20%-80% is not unusual, this can be an impossible task.  If the downlink speed is set too high your QoS will simply not work.  If set to low you will under utilize your link and feel cheated.  For this reason I recommend that you use the ACC if you want your QoS to work.
 ===== Active Congestion Controller (ACC) =====
@@ Line 260: / Line 260: @@
 Don't complain on the forum that your router's native firmware gives you better throughput than Gargoyle firmware does.  With Gargoyle you are getting features and stability which you do not have with your native firmware.  If you cannot achieve the speeds you want get a faster router.
+----------------
+All routers have a maximum processing speed for the WAN link. If you lower your total WAN bandwidth (upload plus download) to below this maximum on the Gargoyle QoS screens then Gargoyle will throttle your throughput and all your Gargoyle functions will work properly. This may result in you not being able to utilize the full bandwidth your ISP provides you but you will have stable and predictable performance.
+Selecting a router that has enough horsepower to handle your full bandwidth is important if you really want to use all your available bandwidth. Stock firmware which comes with your modem will usually provide higher throughput than Gargoyle. The reason for this is simple. The stock firmware does not have the advanced features of Gargoyle. Especially QoS and Bandwidth monitoring. These are the features that require CPU horsepower. If you turn them off in Gargoyle you will also see a high throughput capability.
+Like a car top-end speed is not the only desirable feature. The many other features that you use everyday are usually what you should concentrate on and these are what Gargoyle provides.
 ===== FAQS =====

Gargoyle Wiki

User Tools

Site Tools

Differences

Page Tools