Gargoyle Forum

Posted: **Sun Aug 14, 2016 12:41 pm**

I was using version '1.5.X (Built 20140325-1508 git@505e8dc)' provided by my Wireless ISP out-of-box (CPE-Outdoor) in Gateway/AP mode which uses PPPoE over Wireless to authenticate using username and password. It has only one Ethernet Port (PoE enabled) and extend connection to my another router inside home (D-Link 2750U), which further shares this connection via its own LAN & Wifi.

Today, I have upgraded CEP-Outdoor unit to Gargoyle version 1.8.1 without fail, but now when logged into to Web panel, Basic > Connect Via: PPPoE (Wireless) option from dropdown box is gone. I cant connect to my WISP if this is not available.

screwed.

Any help, pointers, suggestion will be very helpful. Thanks for your time and efforts.

Old Version System Details

Code: Select all

/ # uname -a
Linux DBCLiteM2 3.3.8 #239 Tue Mar 25 20:46:50 IST 2014 mips GNU/Linux

/ # cat /proc/cpuinfo
system type             : Atheros AR9330 rev 1
machine                 : TP-LINK TL-WR741ND v4
processor               : 0
cpu model               : MIPS 24Kc V7.4
BogoMIPS                : 265.42
wait instruction        : yes
microsecond timers      : yes
tlb_entries             : 16
extra interrupt vector  : yes
hardware watchpoint     : yes, count: 4, address/irw mask: [0x0000, 0x0ff8, 0x0ff8, 0x0ff8]
ASEs implemented        : mips16
shadow register sets    : 1
kscratch registers      : 0
core                    : 0
VCED exceptions         : not available
VCEI exceptions         : not available

/ # cat /proc/version 
Linux version 3.3.8 (arajput@localhost.localdomain) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #239 Tue Mar 25 20:46:50 IST 2014

/ # cat /proc/cmdline 
 board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd

/ # opkg list-installed
base-files - 115-unknown
bridge - 1.5-1
busybox - 1.19.4-4
bwmon-gargoyle - 1.5.0-1
ddns-gargoyle - 1.5.0-1
dnsmasq - 2.62-2
dropbear - 2011.54-2
ebtables - 2.0.10-4-1
ewget - 1.5.0-1
firewall - 2-53
gargoyle - 1.5.0-6
gargoyle-firewall-util - 1.5.0-1
haserl - 0.9.26-1
hotplug2 - 1.0-beta-4
httpd-gargoyle - 1.5.0-1
ip - 3.3.0-1
ipset - 6.11-2
iptables - 1.4.10-4
iptables-mod-bandwidth - 1.4.10-4
iptables-mod-conntrack-extra - 1.4.10-4
iptables-mod-extra - 1.4.10-4
iptables-mod-filter - 1.4.10-4
iptables-mod-imq - 1.4.10-4
iptables-mod-ipopt - 1.4.10-4
iptables-mod-iprange - 1.4.10-4
iptables-mod-ipset - 1.4.10-4
iptables-mod-nat-extra - 1.4.10-4
iptables-mod-timerange - 1.4.10-4
iptables-mod-webmon - 1.4.10-4
iptables-mod-weburl - 1.4.10-4
iw - 3.3-1
jshn - 2012-07-08-cca2ed6c8cdb3555fea43ff63ba1c9905dd7a164
kernel - 3.3.8-1-be7cfa969d5b74659eab981eb909cf14
kmod-ath - 3.3.8+2012-09-07-2
kmod-ath9k - 3.3.8+2012-09-07-2
kmod-ath9k-common - 3.3.8+2012-09-07-2
kmod-cfg80211 - 3.3.8+2012-09-07-2
kmod-crypto-aes - 3.3.8-1
kmod-crypto-arc4 - 3.3.8-1
kmod-crypto-core - 3.3.8-1
kmod-ebtables - 3.3.8-1
kmod-gpio-button-hotplug - 3.3.8-1
kmod-ipt-bandwidth - 3.3.8-1
kmod-ipt-conntrack - 3.3.8-1
kmod-ipt-conntrack-extra - 3.3.8-1
kmod-ipt-core - 3.3.8-1
kmod-ipt-extra - 3.3.8-1
kmod-ipt-filter - 3.3.8-1
kmod-ipt-imq - 3.3.8-1
kmod-ipt-ipopt - 3.3.8-1
kmod-ipt-iprange - 3.3.8-1
kmod-ipt-ipset - 3.3.8+6.11-2
kmod-ipt-nat - 3.3.8-1
kmod-ipt-nat-extra - 3.3.8-1
kmod-ipt-nathelper - 3.3.8-1
kmod-ipt-timerange - 3.3.8-1
kmod-ipt-webmon - 3.3.8-1
kmod-ipt-weburl - 3.3.8-1
kmod-leds-gpio - 3.3.8-1
kmod-ledtrig-default-on - 3.3.8-1
kmod-ledtrig-netdev - 3.3.8-1
kmod-ledtrig-timer - 3.3.8-1
kmod-lib-crc-ccitt - 3.3.8-1
kmod-lib-crc16 - 3.3.8-1
kmod-lib-textsearch - 3.3.8-1
kmod-mac80211 - 3.3.8+2012-09-07-2
kmod-nfnetlink - 3.3.8-1
kmod-nls-base - 3.3.8-1
kmod-ppp - 3.3.8-1
kmod-pppoe - 3.3.8-1
kmod-pppox - 3.3.8-1
kmod-sched - 3.3.8-1
kmod-sched-core - 3.3.8-1
kmod-tun - 3.3.8-1
kmod-wdt-ath79 - 3.3.8-1
libblobmsg-json - 2012-07-08-cca2ed6c8cdb3555fea43ff63ba1c9905dd7a164
libc - 0.9.33.2-1
libcyassl - 1.6.5-1
libericstools - 1.5.0-1
libgcc - 4.6-linaro-1
libip4tc - 1.4.10-4
libiptbwctl - 1.5.0-1
libjson - 0.9-2
libmnl - 1.0.1-1
libnl-tiny - 0.1-3
libpthread - 0.9.33.2-1
librt - 0.9.33.2-1
libubox - 2012-07-08-cca2ed6c8cdb3555fea43ff63ba1c9905dd7a164
libubus - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
libuci - 2012-03-28.1-1
libxtables - 1.4.10-4
miniupnpd - 1.5.20110309-1
mtd - 18
netifd - 2012-09-13-8a671b56edd90d9b19ea4317ce664793ee324cb4
opkg - 618-2
portmap - 6.0-3
ppp - 2.4.5-6
ppp-mod-pppoe - 2.4.5-6
qos-gargoyle - 1.5.0-1
rp-pppoe-relay - 3.10-2
sha1sum - 1.5.0-1
swconfig - 10
tc - 3.3.0-1
uboot-envtools - 2012.04.01-1
ubus - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
ubusd - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
uci - 2012-03-28.1-1
webmon-gargoyle - 1.5.0-1
wireless-tools - 29-5
wpad - 20120910-1
zip - 2.32-1

Posted: **Sun Aug 14, 2016 6:16 pm**

That looks like a customised version of Gargoyle from your ISP. They probably added that option (among others) in.
I do not recall any official versions with that feature and I can't find that code version in the repository.

So you may need to call your ISP and tell them you've been a naughty boy and flashed a new firmware

Or, manually configure the network at the command line. However I can't find many references to wireless PPPoE so that could be a pipe dream.

Posted: **Sun Aug 14, 2016 10:21 pm**

@Lantis, I really appreciate it.
How does people build such custom stuff?

Is there anyway, that I can reconstruct it from config backup and list of packages where installed on device?
List of Packages before firmware upgrade:

Code: Select all

/ # opkg list-installed
base-files - 115-unknown
bridge - 1.5-1
busybox - 1.19.4-4
bwmon-gargoyle - 1.5.0-1
ddns-gargoyle - 1.5.0-1
dnsmasq - 2.62-2
dropbear - 2011.54-2
ebtables - 2.0.10-4-1
ewget - 1.5.0-1
firewall - 2-53
gargoyle - 1.5.0-6
gargoyle-firewall-util - 1.5.0-1
haserl - 0.9.26-1
hotplug2 - 1.0-beta-4
httpd-gargoyle - 1.5.0-1
ip - 3.3.0-1
ipset - 6.11-2
iptables - 1.4.10-4
iptables-mod-bandwidth - 1.4.10-4
iptables-mod-conntrack-extra - 1.4.10-4
iptables-mod-extra - 1.4.10-4
iptables-mod-filter - 1.4.10-4
iptables-mod-imq - 1.4.10-4
iptables-mod-ipopt - 1.4.10-4
iptables-mod-iprange - 1.4.10-4
iptables-mod-ipset - 1.4.10-4
iptables-mod-nat-extra - 1.4.10-4
iptables-mod-timerange - 1.4.10-4
iptables-mod-webmon - 1.4.10-4
iptables-mod-weburl - 1.4.10-4
iw - 3.3-1
jshn - 2012-07-08-cca2ed6c8cdb3555fea43ff63ba1c9905dd7a164
kernel - 3.3.8-1-be7cfa969d5b74659eab981eb909cf14
kmod-ath - 3.3.8+2012-09-07-2
kmod-ath9k - 3.3.8+2012-09-07-2
kmod-ath9k-common - 3.3.8+2012-09-07-2
kmod-cfg80211 - 3.3.8+2012-09-07-2
kmod-crypto-aes - 3.3.8-1
kmod-crypto-arc4 - 3.3.8-1
kmod-crypto-core - 3.3.8-1
kmod-ebtables - 3.3.8-1
kmod-gpio-button-hotplug - 3.3.8-1
kmod-ipt-bandwidth - 3.3.8-1
kmod-ipt-conntrack - 3.3.8-1
kmod-ipt-conntrack-extra - 3.3.8-1
kmod-ipt-core - 3.3.8-1
kmod-ipt-extra - 3.3.8-1
kmod-ipt-filter - 3.3.8-1
kmod-ipt-imq - 3.3.8-1
kmod-ipt-ipopt - 3.3.8-1
kmod-ipt-iprange - 3.3.8-1
kmod-ipt-ipset - 3.3.8+6.11-2
kmod-ipt-nat - 3.3.8-1
kmod-ipt-nat-extra - 3.3.8-1
kmod-ipt-nathelper - 3.3.8-1
kmod-ipt-timerange - 3.3.8-1
kmod-ipt-webmon - 3.3.8-1
kmod-ipt-weburl - 3.3.8-1
kmod-leds-gpio - 3.3.8-1
kmod-ledtrig-default-on - 3.3.8-1
kmod-ledtrig-netdev - 3.3.8-1
kmod-ledtrig-timer - 3.3.8-1
kmod-lib-crc-ccitt - 3.3.8-1
kmod-lib-crc16 - 3.3.8-1
kmod-lib-textsearch - 3.3.8-1
kmod-mac80211 - 3.3.8+2012-09-07-2
kmod-nfnetlink - 3.3.8-1
kmod-nls-base - 3.3.8-1
kmod-ppp - 3.3.8-1
kmod-pppoe - 3.3.8-1
kmod-pppox - 3.3.8-1
kmod-sched - 3.3.8-1
kmod-sched-core - 3.3.8-1
kmod-tun - 3.3.8-1
kmod-wdt-ath79 - 3.3.8-1
libblobmsg-json - 2012-07-08-cca2ed6c8cdb3555fea43ff63ba1c9905dd7a164
libc - 0.9.33.2-1
libcyassl - 1.6.5-1
libericstools - 1.5.0-1
libgcc - 4.6-linaro-1
libip4tc - 1.4.10-4
libiptbwctl - 1.5.0-1
libjson - 0.9-2
libmnl - 1.0.1-1
libnl-tiny - 0.1-3
libpthread - 0.9.33.2-1
librt - 0.9.33.2-1
libubox - 2012-07-08-cca2ed6c8cdb3555fea43ff63ba1c9905dd7a164
libubus - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
libuci - 2012-03-28.1-1
libxtables - 1.4.10-4
miniupnpd - 1.5.20110309-1
mtd - 18
netifd - 2012-09-13-8a671b56edd90d9b19ea4317ce664793ee324cb4
opkg - 618-2
portmap - 6.0-3
ppp - 2.4.5-6
ppp-mod-pppoe - 2.4.5-6
qos-gargoyle - 1.5.0-1
rp-pppoe-relay - 3.10-2
sha1sum - 1.5.0-1
swconfig - 10
tc - 3.3.0-1
uboot-envtools - 2012.04.01-1
ubus - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
ubusd - 2012-06-01-a62e2f8c15a65efb1a82404d8f31e3bfc1cbe7d9
uci - 2012-03-28.1-1
webmon-gargoyle - 1.5.0-1
wireless-tools - 29-5
wpad - 20120910-1
zip - 2.32-1

dmesg output:

Code: Select all

[    0.000000] Linux version 3.3.8 (                                                                                                                            ) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #239 Tue Mar 25 20:46:50 IST 2014
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[    0.000000] SoC: Atheros AR9330 rev 1
[    0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00002000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00002000
[    0.000000] On node 0 totalpages: 8192
[    0.000000] free_area_init_node: node 0, pgdat 802d37c0, node_mem_map 81000000
[    0.000000]   Normal zone: 64 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 8128 pages, LIFO batch:0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  board=TL-WR741ND-v4 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 29268k/32768k available (2125k kernel code, 3500k reserved, 385k data, 180k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:51
[    0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[    0.080000] pid_max: default: 32768 minimum: 301
[    0.080000] Mount-cache hash table entries: 512
[    0.090000] NET: Registered protocol family 16
[    0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
[    0.100000] MIPS: machine is TP-LINK TL-WR741ND v4
[    0.510000] bio: create slab <bio-0> at 0
[    0.520000] Switching to clocksource MIPS
[    0.520000] NET: Registered protocol family 2
[    0.530000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.530000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.530000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.540000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.550000] TCP reno registered
[    0.550000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.560000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.560000] NET: Registered protocol family 1
[    0.570000] PCI: CLS 0 bytes, default 32
[    0.590000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.590000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.600000] msgmni has been set to 57
[    0.600000] io scheduler noop registered
[    0.610000] io scheduler deadline registered (default)
[    0.610000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.620000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[    0.620000] console [ttyATH0] enabled, bootconsole disabled
[    0.640000] m25p80 spi0.0: found w25q32, expected m25p80
[    0.640000] m25p80 spi0.0: w25q32 (4096 Kbytes)
[    0.650000] 5 tp-link partitions found on MTD device spi0.0
[    0.650000] Creating 5 MTD partitions on "spi0.0":
[    0.660000] 0x000000000000-0x000000020000 : "u-boot"
[    0.660000] 0x000000020000-0x0000000ffed8 : "kernel"
[    0.670000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.680000] 0x0000000ffed8-0x0000003f0000 : "rootfs"
[    0.690000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
[    0.700000] mtd: partition "rootfs" set to be root filesystem
[    0.700000] mtd: partition "rootfs_data" created automatically, ofs=350000, len=A0000 
[    0.710000] 0x000000350000-0x0000003f0000 : "rootfs_data"
[    0.720000] 0x0000003f0000-0x000000400000 : "art"
[    0.720000] 0x000000020000-0x0000003f0000 : "firmware"
[    0.750000] ag71xx_mdio: probed
[    0.750000] eth0: Atheros AG71xx at 0xba000000, irq 5
[    1.310000] eth0: Found an AR7240/AR9330 built-in switch
[    2.340000] eth1: Atheros AG71xx at 0xb9000000, irq 4
[    2.890000] ag71xx ag71xx.0: eth1: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[    2.900000] TCP cubic registered
[    2.900000] NET: Registered protocol family 17
[    2.910000] Bridge firewalling registered
[    2.910000] Ebtables v2.0 registered
[    2.910000] 8021q: 802.1Q VLAN Support v1.8
[    2.920000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[    2.930000] Freeing unused kernel memory: 180k freed
[    6.110000] Registered led device: tp-link:green:lan1
[    6.110000] Registered led device: tp-link:green:lan2
[    6.110000] Registered led device: tp-link:green:lan3
[    6.110000] Registered led device: tp-link:green:lan4
[    6.110000] Registered led device: tp-link:green:qss
[    6.110000] Registered led device: tp-link:green:system
[    6.110000] Registered led device: tp-link:green:wan
[    6.110000] Registered led device: tp-link:green:wlan
[    6.580000] eth0: link up (1000Mbps/Full duplex)
[    9.440000] JFFS2 notice: (412) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 60 of xref (0 dead, 46 orphan) found.
[    9.650000] eth0: link down
[   10.560000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.570000] Backport based on wireless-testing.git master-2012-09-07
[   10.570000] compat.git: wireless-testing.git
[   10.610000] cfg80211: Calling CRDA to update world regulatory domain
[   10.610000] cfg80211: World regulatory domain updated:
[   10.620000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.630000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.630000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.640000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.650000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.660000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.550000] ath: EEPROM regdomain: 0x0
[   11.550000] ath: EEPROM indicates default country code should be used
[   11.550000] ath: doing EEPROM country->regdmn map search
[   11.550000] ath: country maps to regdmn code: 0x3a
[   11.550000] ath: Country alpha2 being used: US
[   11.550000] ath: Regpair used: 0x3a
[   11.550000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   11.550000] Registered led device: ath9k-phy0
[   11.550000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[   11.560000] cfg80211: Calling CRDA for country: US
[   11.560000] cfg80211: Regulatory domain changed to country: US
[   11.570000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.580000] cfg80211:   (2302000 KHz - 2594000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[   11.580000] cfg80211:   (4920000 KHz - 6000000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[   11.840000] PPP generic driver version 2.4.2
[   11.870000] tun: Universal TUN/TAP device driver, 1.6
[   11.880000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   11.970000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   12.130000] NET: Registered protocol family 24
[   12.150000] nf_conntrack version 0.5.0 (460 buckets, 1840 max)
[   12.640000] xt_time: kernel timezone is -0000
[   12.960000]  Hooked IMQ after mangle on PREROUTING
[   12.960000]  Hooked IMQ after nat on POSTROUTING
[   12.970000] IMQ driver loaded successfully. (numdevs = 2, numqueues = 1)
[   13.180000] Netfilter messages via NETLINK v0.30.
[   13.240000] ip_set: protocol 6
[   18.650000] device eth0 entered promiscuous mode
[   18.680000] device eth1 entered promiscuous mode
[   19.310000] eth0: link up (1000Mbps/Full duplex)
[   19.310000] br-lan: port 1(eth0) entered forwarding state
[   19.320000] br-lan: port 1(eth0) entered forwarding state
[   21.320000] br-lan: port 1(eth0) entered forwarding state
[   22.830000] device wlan0 entered promiscuous mode
[   23.150000] wlan0: authenticate with 00:27:22:18:dc:85
[   23.160000] wlan0: send auth to 00:27:22:18:dc:85 (try 1/3)
[   23.560000] wlan0: send auth to 00:27:22:18:dc:85 (try 2/3)
[   23.580000] wlan0: authenticated
[   23.590000] wlan0: associate with 00:27:22:18:dc:85 (try 1/3)
[   23.600000] wlan0: RX AssocResp from 00:27:22:18:dc:85 (capab=0x421 status=0 aid=2)
[   23.610000] wlan0: associated
[   23.610000] br-wan: port 1(wlan0) entered forwarding state
[   23.620000] br-wan: port 1(wlan0) entered forwarding state
[   25.620000] br-wan: port 1(wlan0) entered forwarding state
[   40.990000] br-wan: port 1(wlan0) entered disabled state
[   41.000000] device wlan0 left promiscuous mode
[   41.000000] br-wan: port 1(wlan0) entered disabled state
[   41.020000] device wlan0 entered promiscuous mode
[   41.020000] br-wan: port 1(wlan0) entered forwarding state
[   41.030000] br-wan: port 1(wlan0) entered forwarding state
[   43.030000] br-wan: port 1(wlan0) entered forwarding state
[   48.370000] br-wan: port 1(wlan0) entered disabled state
[   48.390000] device wlan0 left promiscuous mode
[   48.390000] br-wan: port 1(wlan0) entered disabled state
[   48.400000] device wlan0 entered promiscuous mode
[   48.410000] br-wan: port 1(wlan0) entered forwarding state
[   48.410000] br-wan: port 1(wlan0) entered forwarding state
[   50.410000] br-wan: port 1(wlan0) entered forwarding state
[   64.000000] ipt_bandwidth: timezone shift of 330 minutes detected, adjusting
[   64.010000]                old minutes west=0, new minutes west=-330
[  332.670000] ipt_bandwidth: backwards time shift detected, adjusting
[  332.670000]

Code: Select all


<!--
	var gargoyleBinRoot = "/www/.";
	var wirelessIfs = [  "wlan0" ];
	var uciWirelessDevs = [  "radio0" ];
	var currentWirelessMacs = [  "0C:D2:B5:3A:14:D0" ];
	var defaultLanIf = "eth0";
	var currentLanIf = "eth0 eth1";
	var currentLanName = "br-lan";
	var currentLanMac = "0C:D2:B5:3A:14:CF";
	var currentLanIp = "192.168.12.1";
	var currentLanMask = "255.255.255.0";
	var defaultWanIf = "eth1";
	var defaultWanMac = "0C:D2:B5:3A:14:D1";
	var currentWanIf = "pppoe-wan";
	var currentWanName = "pppoe-wan";
	var currentWanMac = "00:00:00:00:00:00";
	var currentWanIp = "172.17.16.20";
	var currentWanMask = "255.255.255.255";
	var currentWanGateway = "59.144.94.50";
	var uciOriginal = new UCIContainer();
	uciOriginal.set('gargoyle', 'global', '', "global");
	uciOriginal.set('gargoyle', 'global', 'web_root', "/www");
	uciOriginal.set('gargoyle', 'global', 'bin_root', ".");
	uciOriginal.set('gargoyle', 'global', 'js_root', "js");
	uciOriginal.set('gargoyle', 'global', 'theme_root', "themes");
	uciOriginal.set('gargoyle', 'global', 'theme', "default");
	uciOriginal.set('gargoyle', 'global', 'common_css', "common.css");
	uciOriginal.set('gargoyle', 'global', 'common_js', "common.js");
	uciOriginal.set('gargoyle', 'global', 'require_web_password', "1");
	uciOriginal.set('gargoyle', 'global', 'session_timeout', "15");
	uciOriginal.set('gargoyle', 'global', 'version', "1.5.X (Built 20140325-1508 git@505e8dc)");
	uciOriginal.set('gargoyle', 'global', 'dateformat', "australia");
	uciOriginal.set('gargoyle', 'display', '', "display");
	uciOriginal.set('gargoyle', 'display', 'firewall', "Firewall");
	uciOriginal.set('gargoyle', 'display', 'firewall_portforwarding', "Port Forwarding");
	uciOriginal.set('gargoyle', 'display', 'firewall_connlimits', "Connection Limits");
	uciOriginal.set('gargoyle', 'display', 'firewall_restriction', "Restrictions");
	uciOriginal.set('gargoyle', 'display', 'firewall_quotas', "Quotas");
	uciOriginal.set('gargoyle', 'display', 'firewall_qosupload', "QoS (Upload)");
	uciOriginal.set('gargoyle', 'display', 'firewall_qosdownload', "QoS (Download)");
	uciOriginal.set('gargoyle', 'display', 'status', "Status");
	uciOriginal.set('gargoyle', 'display', 'status_overview', "Overview");
	uciOriginal.set('gargoyle', 'display', 'status_bandwidth', "Bandwidth Usage");
	uciOriginal.set('gargoyle', 'display', 'status_bdist', "B/W Distribution");
	uciOriginal.set('gargoyle', 'display', 'status_webmon', "Web Usage");
	uciOriginal.set('gargoyle', 'display', 'status_quotause', "Quota Usage");
	uciOriginal.set('gargoyle', 'display', 'status_qos', "QoS Distribution");
	uciOriginal.set('gargoyle', 'display', 'status_hosts', "Connected Hosts");
	uciOriginal.set('gargoyle', 'display', 'status_connections', "Connection List");
	uciOriginal.set('gargoyle', 'display', 'connection', "Connection");
	uciOriginal.set('gargoyle', 'display', 'connection_dyndns', "Dynamic DNS");
	uciOriginal.set('gargoyle', 'display', 'connection_dhcp', "DHCP");
	uciOriginal.set('gargoyle', 'display', 'connection_basic', "Basic");
	uciOriginal.set('gargoyle', 'display', 'connection_routing', "Routing");
	uciOriginal.set('gargoyle', 'display', 'connection_wol', "Wake on LAN");
	uciOriginal.set('gargoyle', 'display', 'system', "System");
	uciOriginal.set('gargoyle', 'display', 'system_access', "Router Access");
	uciOriginal.set('gargoyle', 'display', 'system_ident', "Identification");
	uciOriginal.set('gargoyle', 'display', 'system_time', "Time");
	uciOriginal.set('gargoyle', 'display', 'system_backup', "Backup / Restore");
	uciOriginal.set('gargoyle', 'display', 'system_update', "Update Firmware");
	uciOriginal.set('gargoyle', 'display', 'system_reboot', "Reboot");
	uciOriginal.set('gargoyle', 'display', 'system_about', "About");
	uciOriginal.set('gargoyle', 'display', 'logout', "Logout");
	uciOriginal.set('gargoyle', 'scripts', '', "scripts");
	uciOriginal.set('gargoyle', 'scripts', 'firewall_portforwarding', "port_forwarding.sh");
	uciOriginal.set('gargoyle', 'scripts', 'firewall_connlimits', "connlimits.sh");
	uciOriginal.set('gargoyle', 'scripts', 'firewall_restriction', "restriction.sh");
	uciOriginal.set('gargoyle', 'scripts', 'firewall_quotas', "quotas.sh");
	uciOriginal.set('gargoyle', 'scripts', 'firewall_qosupload', "qos_upload.sh");
	uciOriginal.set('gargoyle', 'scripts', 'firewall_qosdownload', "qos_download.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_overview', "overview.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_bandwidth', "bandwidth.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_bdist', "bandwidth_distribution.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_quotause', "quota_usage.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_webmon', "webmon.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_qos', "qos_distribution.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_hosts', "hosts.sh");
	uciOriginal.set('gargoyle', 'scripts', 'status_connections', "conntrack.sh");
	uciOriginal.set('gargoyle', 'scripts', 'connection_dyndns', "ddns.sh");
	uciOriginal.set('gargoyle', 'scripts', 'connection_basic', "basic.sh");
	uciOriginal.set('gargoyle', 'scripts', 'connection_dhcp', "dhcp.sh");
	uciOriginal.set('gargoyle', 'scripts', 'connection_routing', "routing.sh");
	uciOriginal.set('gargoyle', 'scripts', 'connection_wol', "wol.sh");
	uciOriginal.set('gargoyle', 'scripts', 'system_access', "access.sh");
	uciOriginal.set('gargoyle', 'scripts', 'system_ident', "identification.sh");
	uciOriginal.set('gargoyle', 'scripts', 'system_time', "time.sh");
	uciOriginal.set('gargoyle', 'scripts', 'system_backup', "backup.sh");
	uciOriginal.set('gargoyle', 'scripts', 'system_update', "update.sh");
	uciOriginal.set('gargoyle', 'scripts', 'system_reboot', "reboot.sh");
	uciOriginal.set('gargoyle', 'scripts', 'system_about', "about.sh");
	uciOriginal.set('gargoyle', 'scripts', 'logout', "logout.sh");
	uciOriginal.set('gargoyle', 'firewall', '', "300");
	uciOriginal.set('gargoyle', 'firewall', 'portforwarding', "100");
	uciOriginal.set('gargoyle', 'firewall', 'connlimits', "115");
	uciOriginal.set('gargoyle', 'firewall', 'restriction', "125");
	uciOriginal.set('gargoyle', 'firewall', 'quotas', "175");
	uciOriginal.set('gargoyle', 'firewall', 'qosupload', "200");
	uciOriginal.set('gargoyle', 'firewall', 'qosdownload', "300");
	uciOriginal.set('gargoyle', 'status', '', "100");
	uciOriginal.set('gargoyle', 'status', 'overview', "100");
	uciOriginal.set('gargoyle', 'status', 'bandwidth', "200");
	uciOriginal.set('gargoyle', 'status', 'bdist', "220");
	uciOriginal.set('gargoyle', 'status', 'webmon', "250");
	uciOriginal.set('gargoyle', 'status', 'hosts', "400");
	uciOriginal.set('gargoyle', 'status', 'connections', "500");
	uciOriginal.set('gargoyle', 'connection', '', "200");
	uciOriginal.set('gargoyle', 'connection', 'basic', "100");
	uciOriginal.set('gargoyle', 'connection', 'dhcp', "200");
	uciOriginal.set('gargoyle', 'connection', 'dyndns', "300");
	uciOriginal.set('gargoyle', 'connection', 'routing', "400");
	uciOriginal.set('gargoyle', 'connection', 'wol', "500");
	uciOriginal.set('gargoyle', 'system', '', "400");
	uciOriginal.set('gargoyle', 'system', 'access', "100");
	uciOriginal.set('gargoyle', 'system', 'ident', "200");
	uciOriginal.set('gargoyle', 'system', 'time', "300");
	uciOriginal.set('gargoyle', 'system', 'backup', "400");
	uciOriginal.set('gargoyle', 'system', 'update', "500");
	uciOriginal.set('gargoyle', 'system', 'reboot', "600");
	uciOriginal.set('gargoyle', 'system', 'about', "1000");
	uciOriginal.set('gargoyle', 'logout', '', "500");
	uciOriginal.set('gargoyle', 'bandwidth_display', '', "bandwidth_display");
	uciOriginal.set('gargoyle', 'help', '', "help");
	uciOriginal.set('gargoyle', 'help', 'ddns_1', "1");
	uciOriginal.set('network', 'loopback', '', "interface");
	uciOriginal.set('network', 'loopback', 'ifname', "lo");
	uciOriginal.set('network', 'loopback', 'proto', "static");
	uciOriginal.set('network', 'loopback', 'ipaddr', "127.0.0.1");
	uciOriginal.set('network', 'loopback', 'netmask', "255.0.0.0");
	uciOriginal.set('network', 'lan', '', "interface");
	uciOriginal.set('network', 'lan', 'type', "bridge");
	uciOriginal.set('network', 'lan', 'proto', "static");
	uciOriginal.set('network', 'lan', 'netmask', "255.255.255.0");
	uciOriginal.set('network', 'lan', 'ipaddr', "192.168.12.1");
	uciOriginal.set('network', 'lan', 'dns', "8.8.4.4 8.8.8.8");
	uciOriginal.set('network', 'lan', 'ifname', "eth0 eth1");
	uciOriginal.set('network', 'wan', '', "interface");
	uciOriginal.set('network', 'wan', 'type', "bridge");
	uciOriginal.set('network', 'wan', 'vendorid', "Outdoor_idea");
	uciOriginal.set('network', 'wan', 'proto', "pppoe");
	uciOriginal.set('network', 'wan', 'username', "max_ysk");
	uciOriginal.set('network', 'wan', 'keepalive', "3 5");
	uciOriginal.set('network', 'wan', 'password', "xxxxxxxxx");
	uciOriginal.set('network', 'wan', 'peerdns', "0");
	uciOriginal.set('network', 'wan', 'dns', "8.8.4.4 8.8.8.8");
	uciOriginal.set('network', 'cfg053777', '', "switch");
	uciOriginal.set('network', 'cfg053777', 'name', "eth0");
	uciOriginal.set('network', 'cfg053777', 'reset', "1");
	uciOriginal.set('network', 'cfg053777', 'enable_vlan', "1");
	uciOriginal.set('network', 'cfg071ec7', '', "switch_vlan");
	uciOriginal.set('network', 'cfg071ec7', 'device', "eth0");
	uciOriginal.set('network', 'cfg071ec7', 'vlan', "1");
	uciOriginal.set('network', 'cfg071ec7', 'ports', "0 1 2 3 4");
	uciOriginal.set('wireless', 'radio0', '', "wifi-device");
	uciOriginal.set('wireless', 'radio0', 'type', "mac80211");
	uciOriginal.set('wireless', 'radio0', 'macaddr', "0c:d2:b5:3a:14:d0");
	uciOriginal.set('wireless', 'radio0', 'hwmode', "11ng");
	uciOriginal.set('wireless', 'radio0', 'htmode', "HT20");
	uciOriginal.createListOption('wireless', 'radio0', 'ht_capab', true);
	uciOriginal.set('wireless', 'radio0', 'ht_capab', "SHORT-GI-20", true);
	uciOriginal.set('wireless', 'radio0', 'ht_capab', "SHORT-GI-40"…

Posted: **Mon Aug 15, 2016 1:23 am**

Can you please email me your config backup?
I'll take a look and see if we can rebuild it.

I've pm'd you my address.

Gargoyle Forum

PPPoE (Wireless) Connect Via option gone after upgrade

PPPoE (Wireless) Connect Via option gone after upgrade

Re: PPPoE (Wireless) Connect Via option gone after upgrade

Re: PPPoE (Wireless) Connect Via option gone after upgrade

Re: PPPoE (Wireless) Connect Via option gone after upgrade