Gargoyle Forum

My team is a WA701ND (ES) Ver.2.3

I have a problem my tl WA701ND update it to gargoyle_1.9.x-ar71xx-generic-tl-WA701ND-v2-squashfs-factory.bin, including default to 192.168.1.1 ip.

Change the LAN IP 192.168.1.11. and since then I can not go, I want to reset with the reset button that brings the team, but I get nothing.

I hope and can help me on how to restore it or I should do.

I did this:

With "WinSCP" login (SCP mode) as:


Host Name: 192.168.1.1 (or one that has been configured in connection - LAN)

username: root

Password: (if you have created in the gargoyle or "password" default)


but does nothing to connect, download the latest version.

GREETINGS.

To find out what ip you set on your router. Open a command prompt and tipe "ipconfig" and look for the ip under gateway. That should be the ip that's set in your router interface. Then you should be able to log on to your router using Winscp.

if I did the system symbol long before posting on the forum, but nothing appears.

attached image.

Did you look at the thread I linked?
Do a failsafe reset to get you back to a working device.

I did that last link and I get a message :

putty fatal error ;

NETWORK ERROR : Connection Timeout .

And you enter the ip default next and who had given him .

Greetings.

into failsafe mode and open putty and enter telnet mode and I get this:




mount_root + enter the write command; nothing appears.

psswd + enter the write command; ahi whether to accept the command and change the password.

first_boot + enter the write command; nothing appears. this blank as noted.


write the reboot -f command + enter; there if the router restarts normal to want to access by default 192.168.1.1 ip wing does not load.


I hope and I ueda say how to load the firmware again through command greetings.

mount_root
Then do
firstboot -y
Then do
reboot

GREAT FRIEND AND IF I ENTERED BY DEFAULT IP.

ALTHOUGH ACCORDING TO CONFIGURE MY RANGE AND NEEDS AND PUT ON LAN 192.168.11.1 AND SAVE.

  YET NO CHARGE ME ME IS SAME WITH NO PROBLEM BEFORE CHARGE.

BY SERA LAN IP I am giving ?.

REGARDS

Calm down. There's clearly a language barrier here.

How about you show some diagrams of what is going wrong and we will try that.