Page 1 of 1
Bat Gateway - The process did not produce any response
Posted: Mon Jun 13, 2016 10:26 pm
by Mattrmc
Hello, yesterday a updated my router(TL-WR841N) to Gargoyle, and the router worked normally, but today a I tryed to access the router settings and screens shows the following error: "Bad Gateway-The process did not produce any response". Can someone help me? Thanks!
Re: Bat Gateway - The process did not produce any response
Posted: Tue Jun 14, 2016 2:10 am
by Lantis
Try clearing your browser cache.
Do you have any language packs besides English installed?
You may need to restore the router to defaults via the command line.
Re: Bat Gateway - The process did not produce any response
Posted: Tue Jun 14, 2016 9:07 pm
by Mattrmc
Yes, I have other language installed, have I other way to resolve this problem besides restore the router?
Re: Bat Gateway - The process did not produce any response
Posted: Tue Jun 14, 2016 10:20 pm
by Lantis
Which language pack?
There was one in particular which caused this problem and I attempted to fix it. I think it was the Portuguese BR? But unsure.
If you can disable the language pack you might be able to get back in. That would be done from the command line and I'm unsure how. You'd have to run a series of commands.
Re: Bat Gateway - The process did not produce any response
Posted: Wed Jun 15, 2016 8:27 pm
by Mattrmc
Yes, the language pack is the Portuguese-BR
What I have to do?
Re: Bat Gateway - The process did not produce any response
Posted: Wed Jun 15, 2016 10:57 pm
by Lantis
You'll have to factory reset the router using the command line. There's a guide in the forum or someone else can help you out.
I don't have much time at the moment but I'll try and rebuild a new language pack that isn't broken and put it on my server.
Hopefully have it done within 12 hours.
Re: Bat Gateway - The process did not produce any response
Posted: Wed Jun 15, 2016 11:06 pm
by Mattrmc
Ok thanks!
Re: Bat Gateway - The process did not produce any response
Posted: Thu Jun 16, 2016 2:33 am
by Lantis
After resetting your router to defaults, or uninstalling the Portuguese language plugin, please run the following:
Code: Select all
wget -O /tmp/languageinstall.ipk http://lantisproject.com/gargoyle_scripts/plugin-gargoyle-i18n-Portuguese-BR_1.0.0-1_all.ipk
Code: Select all
sh /usr/lib/gargoyle/install_gargoyle_package.sh /tmp/languageinstall.ipk
The Portuguese-BR language pack should then be installed and you can activate it without errors (hopefully).
Please note. Not ever page in the GUI has been translated. In fact, only about 5 of them have. If you have the time, it would be most helpful if you could translate the remaining pages by following the instructions here:
viewtopic.php?f=14&t=5077#p32026
Re: Bat Gateway - The process did not produce any response
Posted: Thu Jun 16, 2016 10:23 am
by Mattrmc
I will try to help you and your team with the traduction, thanks for the atenttion!