only ethernet internet works
Posted: Sun Jun 12, 2016 2:21 am
hardware: TP-LINK TL-WR841ND http://www.tp-link.com/lk/products/deta ... 841ND.html
hardware Version: 7.2
Gargoyle: 1.8.1
Device Configuration: Wireless Bridge/Repeater
Bridge IP Address: 192.168.1.55
Bridge Netmask: 255.255.255.0
LAN Gateway IP: 192.168.1.1
Connected via: Client Bridge
Bridge SSID: Gargoyle
WAN ethernet port: Bridge to LAN
This device gets its internet through the (blue) ethernet WAN port. It is designed to share the internet over wi-fi and additional ethernet ports (4 yellow ones).
It also has wi-fi, but I cannot get internet through wi-fi, despite trying so many different settings in Gargoyle for 2 days. My head is about to explode. If there is any other information your require, please ask.
Everything was working fine (wifi + ethernet) before I decided to flash Gargoyle on it.
Please help.
hardware Version: 7.2
Gargoyle: 1.8.1
Device Configuration: Wireless Bridge/Repeater
Bridge IP Address: 192.168.1.55
Bridge Netmask: 255.255.255.0
LAN Gateway IP: 192.168.1.1
Connected via: Client Bridge
Bridge SSID: Gargoyle
WAN ethernet port: Bridge to LAN
This device gets its internet through the (blue) ethernet WAN port. It is designed to share the internet over wi-fi and additional ethernet ports (4 yellow ones).
It also has wi-fi, but I cannot get internet through wi-fi, despite trying so many different settings in Gargoyle for 2 days. My head is about to explode. If there is any other information your require, please ask.
Everything was working fine (wifi + ethernet) before I decided to flash Gargoyle on it.
Please help.